Sage Journals: Discover world-class research

Abstract

The main source of railway noise is the rolling of the steel wheel on the steel rail. Theoretical models of the phenomenon have been under development since the 1970s, culminating in the Track-Wheel Interaction Noise Software (TWINS). Using the TWINS model, it is possible to evaluate the rolling-noise behavior of different wheel and track designs and thereby derive new designs that are inherently quieter. An overview is given of the mechanisms involved in noise generation and the parameters that have the most influence on the noise are identified. It is usually important to reduce the noise from both the wheel and the track. Some examples are given of techniques that are being developed using the model with the aim of reducing the noise at the source.

Get full access to this article

View all access options for this article.

References

Remington

P. J.

Wheel/Rail Noise, Part I: Characterization of the Wheel/Rail Dynamic System. Journal of Sound and Vibration, Vol. 46, No. 3, 1976, pp. 359–379.

Remington

P. J.

Wheel/Rail Noise, Part IV: Rolling Noise. Journal of Sound and Vibration, Vol. 46, No. 3, 1976, pp. 419–436.

Remington

P. J.

Wheel/Rail Rolling Noise, Part I: Theoretical Analysis. Journal of the Acoustical Society of America, Vol. 81, No. 6, 1987, pp. 1805–1823.

Thompson

D. J.

Wheel-Rail Noise Generation, Part I: Introduction and Interaction Model. Journal of Sound and Vibration, Vol. 161, No. 3, 1993, pp. 387–400.

Thompson

D. J.

Wheel-Rail Noise Generation, Part II: Wheel Vibration. Journal of Sound and Vibration, Vol. 161, No. 3, 1993, pp. 401–419.

Thompson

D. J.

Wheel-Rail Noise Generation, Part III: Rail Vibration. Journal of Sound and Vibration, Vol. 161, No. 3, 1993, pp. 421–446.

Thompson

D. J.

Wheel-Rail Noise Generation, Part IV: Contact Zone and Results. Journal of Sound and Vibration, Vol. 161, No. 3, 1993, pp. 447–466.

Thompson

D. J.

Wheel-Rail Noise Generation, Part V: Inclusion of Wheel Rotation. Journal of Sound and Vibration, Vol. 161, No. 3, 1993, pp. 467–482.

Thompson

D. J.

, Hemsworth

, and Vincent

. Experimental Validation of the TWINS Prediction Program for Rolling Noise, Part I: Description of the Model and Method. Journal of Sound and Vibration, Vol. 193, No. 1, 1996, pp. 123–135.

10.

Thompson

D. J.

, Fodiman

, and Mahé

. Experimental Validation of the TWINS Prediction Program for Rolling Noise, Part II: Results. Journal of Sound and Vibration, Vol. 193, No. 1, 1996, pp. 137–147.

11.

Thompson

D. J.

On the Relationship Between Wheel and Rail Surface Roughness and Rolling Noise. Journal of Sound and Vibration, Vol. 193, No. 1, 1996, pp. 149–160.

12.

Thompson

D. J.

, Vincent

, and Gautier

P. E.

. Validation of a Model for Railway Rolling Noise Using Field Measurements with Sinusoidally Profiled Wheels. Journal of Sound and Vibration, Vol. 223, No. 4, 1999, pp. 587–609.

13.

Jones

C. J. C.

, and Thompson

D. J.

. Rolling Noise Generated by Wheels with Visco-Elastic Layers. Journal of Sound and Vibration (in press).

14.

Gautier

P. E.

, Vincent

, Thompson

D. J.

, and Hölzl

. Railway Wheel Optimization. Proc., Inter-Noise 93, Leuven, Belgium, 1993, pp. 1455–1458.

15.

Vincent

, Bouvet

, Thompson

D. J.

, and Gautier

P. E.

. Theoretical Optimization of Track Components to Reduce Rolling Noise. Journal of Sound and Vibration, Vol. 193, No. 1, 1996, pp. 161–171.

16.

Thompson

D. J.

, and Verheij

J. W.

. The Dynamic Behavior of Rail Fasteners at High Frequencies. Applied Acoustics, Vol. 52, No. 1, 1997, pp. 1–17.

17.

Cox

S. J.

, and Wang

. Noise Characteristics of High-Speed Track with Different Rail Pads. Sixth International Workshop on Railway and Tracked Transit System Noise, Ile des Embiez, France, 1998.

18.

Thompson

D. J.

, Jones

C. J. C.

, Wu

T. X.

, and de France

. The Influence of the Non-Linear Stiffness Behavior of Rail Pads on the Track Component of Rolling Noise: Proceedings of I.Mech.E. Journal of Rail and Rapid Transit, Vol. 213, Part F, 1999, pp. 233–241.

Using Theoretical Models to Design Low-Noise Wheels and Track

Abstract

Get full access to this article

References