Carbon nanofibers (CNFs) and activated carbon (AC) are two forms of carbon with different shape and surface properties. These two carbon materials were used as additive/nucleation agents in the polystyrene extrusion foaming process. Carbon dioxide (CO2) was used as the blowing agent. Both additives showed better properties than talc in thermal insulation foams based on foam density, thermal conductivity, IR transmission, thermal stability, and compressive modulus. Overall, CNFs are better than AC due to the unique foam structure (`pseudo-bimodal' foam structure) of PS+ CNFs foams observed in this study.
Martinez-Perez, C.A., Garcia-Casillas , P.E., Romero, P., Juarez, C., Martinez-Villafane, C.A., Moller, A.D. and Romero-Garcia, J. (2006). Porous Biodegradable Polyurethane Scaffolds Prepared By Thermally Induced Phase Separation, Journal of Advanced Materials (Covina, CA, United States), 5-11.
2.
Wake, M.C., Gupta, P.K. and Mikos, A.G. (1996). Fabrication of Pliable Biodegradable Polymer Foams to Engineer Soft Tissues, Cell Transplantation, 5: 465-473.
3.
Forman, C. (2001). RP-120X Polymeric Foams - Updated Edition; Business Communications Company, Inc. (December 2001).
4.
Unep (2000). The Montreal Protocol on Substances that Deplete the Ozone Layer, Nairobi, Kenya.
5.
Suh, K.W. (2005). In: Lee, S.G. (ed.), Encyclopaedia of Chemical Processing, pp. 237-249, Taylor & Francis, London, UK.
6.
Tomasko, D.L. and Guo, Z. (2007). Supercritical Fluids, In: Kirk-Othmer Encyclopedia of Chemical Technology, 5th edn, pp. 1-29, John Wiley & Sons, Inc., NY.
7.
Lee, L.J. , Zeng, C., Cao , X., Han , X., Shen, J. and Xu , G. (2005). Polymer Nanocomposite Foams, Composites Science and Technology , 65: 2344-2363.
8.
Guo, Z., Lee, L.J. and Tomasko, D.L. (2007). CO2 and Water Vapor Permeability in Polymer Nanocomposites and Foams, SPE ANTEC, Cincinnati, OH, USA, pp. 3109-3114.
9.
Messersmith, P.B. and Giannelis , E.P. (1995). Synthesis and Barrier Properties of Poly(e-caprolactone)-layered Silicate Nanocomposites, Journal of Polymer Science, Part A: Polymer Chemistry, 33: 1047-1057.
Shen, J., Zeng, C. and Lee, L.J. (2005). Synthesis of Polystyrene-carbon Nanofibers Nanocomposite Foams, Polymer, 46: 5218-5224.
12.
Shen, J. (2006). Application of Nanoparticles in Polymeric Foams, Ph.D. Thesis atThe Ohio State University, Columbus, OH, p. 263.
13.
Noordegraaf, J. (2004). Activated Carbon-containing Particulate Expandable Polystyrene Suitable for Production of Thermal Insulators, (Synbra Technology B.V., Neth.). EP 1486530.
14.
Rhodes, M.B. (1994). Characterization of Polymeric Cellular Structures , In: Hilyard, N.C. and Cunningham, A. (ed.), Low Density Cellular Plastics: Physical Basis of Behavior, Chapman & Hall , London, UK, pp. 56-77.
15.
Vo, C.V. and Paquet, A.N. (2004). An Evaluation of the Thermal Conductivity of Extruded Polystyrene Foam Blown with HFC-134a or HCFC-142b , Journal of Cellular Plastics, 40: 205-228.
16.
Paquet, A.N. and Suh, K.W. (1993). (Dow Chemical Co., USA). Carbon Black-containing Bimodal Foam Structures and Process for Making, Application: US, 5210105.
17.
Kuwagaki, H. , Meguro, T., Tatami , T. and Komeya, K. (2003). An Improvement of Thermal Conduction of Activated Carbon by Adding Graphite , Journal of Materials Science, 38: 3279-3284.
18.
Yu, C., Saha, S., Zhou, J., Shi, L., Cassell, A.M., Cruden, B.A., Ngo, Q. and Li, J. (2006). Thermal Contact Resistance and Thermal Conductivity of a Carbon Nanofiber, Journal of Heat Transfer, 128: 234-239.
