An unsymmetric laminated composite having bi-stability is interesting as a morphing structure because it can sustain large deformation without energy supply and the deformed state is stable. Especially, inducing different curvature values at each stable state is important for the practical application of unsymmetric laminates. In this study, we propose a method for tailoring the curvature of unsymmetric cross-ply laminates by curing the composite on a curved tool plate. The results show that the final normal curvature tensor of unsymmetric laminates is the summation of the tool plate curvature tensor and the normal curvature tensor of the laminates.
DanoMLHyerMW. Thermally-induced deformation behavior of unsymmetric laminates. Int J Solids Struct1998; 35(17): 2101–2120.
2.
HyerMW. Calculations of the Room-Temperature Shapes of Unsymmetric Laminates. J Compos Mater1981; 15(Jul): 296–310.
3.
HyerMW. The room-temperature shapes of four-layer unsymmetric cross-ply laminates. J Compos Mater1982; 16(4): 318–318.
4.
JunWJHongCS. Effect of Residual Shear Strain on the Cured Shape of Unsymmetric Cross-Ply Thin Laminates. Compos Sci Technol1990; 38(1): 55–67.
5.
JunWJHongCS. Cured Shape of Unsymmetric Laminates with Arbitrary Lay-up Angles. J Reinf Plast Comp1992; 11(12): 1352–1366.
6.
ChoMKimMHChoiHSChungCHAhnKJEomYS. A study on the room-temperature curvature shapes of unsymmetric laminates including slippage effects. J Compos Mater1998; 32(5): 460–482.
7.
ChoMRohHY. Non-linear analysis of the curved shapes of unsymmetric laminates accounting for slippage effects. Compos Sci Technol2003; 63(15): 2265–2275.
DiaconuCGWeaverPMMattioniF. Concepts for morphing airfoil sections using bi-stable laminated composite structures. Thin-Walled Struct2008; 46(6): 689–701.
13.
Mattioni F, Weaver P, Friswell M and Potter K. Multistable composite plates with piecewise variation of lay-up in the planform. Int J Solids Struct 2009; 46(1): 151–164.
14.
SchultzMR. A concept for airfoil-like active bistable twisting structures. J Intell Mater Sys Struct2008; 19(2): 157–169.
15.
Seung-Won Kim, Je-Sung Koh, Maenghyo Cho and Kyu-Jin Cho. Design & analysis a flytrap robot using bi-stable composite. IEEE International Conference on Robotics and Automation, pp. 215–220, 2011.
16.
GaussCFHiltebeitelAMoreheadJ. General Investigations of Curved Surfaces: Edited with an Introduction and Notes by Peter Pesic. USA: Dover Publications, 20072007.
17.
Reddy, JN. Mechanics of Laminated Composite Plates and Shells: Theory and Analysis, 2nd edn., USA: CRC Press, 2003.
