Sage Journals: Discover world-class research

Abstract

Due to the heterogeneous nature and electric anisotropy, it is challenging to establish a numerical model to analyze the electromagnetic properties of multilayer carbon fiber-reinforced polymer (CFRP) laminate. In this study, we focus on the exploration of an effective electromagnetic modeling approach for calculation of eddy currents in CFRP laminate composite, as well as eddy current testing signals due to surface cracks. In order to prove the feasibility of modeling CFRP laminate with homogeneous anisotropic layers, the electrical parameters in the three directions are measured, and eddy current path in CFRP is investigated according to the measurement results. A finite element solver based on reduced magnetic vector potential ( A _r ) formulation and edge elements is developed to enable the eddy current simulation of anisotropic CFRP material, which avoids matching the discretization of source coils with the rest of conductor mesh, and can easily solve the field continuity problem in the interface between two adjacent fiber layers of CFRP laminate. The A _r formulation and way to calculate the eddy current testing signals are described. To validate of the developed simulation code, a comparison is conducted between the calculated signals and experimental results of thin-opening cracks in a CFRP test piece, which indicates the simulation code can predict eddy current testing signals with good precision.

Keywords

Carbon fibers defects electrical properties finite element analysis nondestructive testing

Get full access to this article

View all access options for this article.

References

Roberts

. Rapid growth forecast for carbon fibre market. Reinf Plast 2007; 51: 10–13.

Angelidis N. Damage sensing in CFRP composites using electrical potential techniques. PhD Thesis, Cranfield University, UK, 2004.

Lubineau G, Yagoubi JA, Saghir S, et al. Cyclic hygrothermal aging of aircraft lightning protections: phenomenological overview. In: 53rd AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics and materials conference, Honolulu, Hawaii, USA, 13–26 April 2012.

Zhou J and Lubineau G. Improving electrical conductivity in polycarbonate nanocomposites using highly conductive PEDOT/PSS coated MWCNTs. ACS Appl Mater Interf 2013; 5(13): 6189–6200.

Mook

Lange

Koeser

. Non-destructive characterization of carbon-fibre-reinforced plastics by means of eddy currents. Compos Sci Technol 2001; 61: 865–873.

Schulte

Baron

. Load and failure analyses of CFRP laminates by means of electrical resistivity measurements. Compos Sci Technol 1989; 36: 63–76.

Irving

Thiagarajan

. Fatigue damage characterization in carbon fibre composite materials using an electric potential technique. Smart Mater Struct 1998; 7: 456–466.

Kupke

Schulte

Schuler

. Non-destructive testing of FRP by DC and AC electrical method. Compos Sci Technol 2001; 61: 837–847.

Todoroki

Matsuura

Kobayashi

. Application of electric potential method to smart composite structures for detecting delamination. JSME Int J Ser A Mech Mater Eng 1995; 38: 524–530.

10.

Todoroki

. Effect of number of electrodes and diagnostic tool for delamination monitoring of graphite/epoxy laminates using electric resistance change. Compos Sci Technol 2001; 61: 1871–1880.

11.

Lubineau

Nouri

Roger

. On micro-meso relations homogenizing electrical properties of transversely cracked laminated composites. Compos Struct 2013; 105: 66–74.

12.

Takagi

Huang

Fukutomi

. Numerical evaluation of correlation between crack size and eddy current testing signal by a very fast simulator. IEEE Trans Magn 1998; 34: 2581–2584.

13.

Gros

. An eddy current approach to the detection of damage caused by low-energy impacts on carbon fibre reinforced materials. Mater Des 1995; 16: 167–173.

14.

Schulze

Heuer

Küttner

. High-resolution eddy current sensor system for quality assessment of carbon fiber materials. Microsyst Technol 2010; 16: 791–797.

15.

Roberts

Sabbagh

. Electromagnetic interactions with an anisotropic slab. IEEE Trans Magn 1988; 24: 3193–3200.

16.

Menana

Féliachi

. An integro-differential model for 3-d eddy current computation in carbon fiber reinforced polymer composites. IEEE Trans Magn 2011; 47: 756–763.

17.

Cacciola

Calcagno

Megali

. Eddy current modeling in composite materials. PIERS Online 2009; 5: 591–595.

18.

Kameari

. Solution of asymmetric conductor with a hole by FEM using edge-element. COMPEL 1990; 9: 230–232.

19.

Huang H, Fukutomi H, Takagi T, et al. Forward and inverse analyses of ECT signals based on reduced vector potential method using database. In: Electromagnetic nondestructive evaluation (II). Amsterdam: IOS Press, 1998, pp. 313–321.

20.

Menana

Féliachi

. 3-D eddy current computation in carbon-fiber reinforced composites. IEEE Trans Magn 2009; 45: 1008–1011.

21.

Summerscales

. Non-destructive testing of fibre-reinforced plastics composites 1990; Vol. 2, Dordrecht, the Netherlands: Kluwer Academic Publishers.

22.

Todoroki

Yoshida

. Electrical resistance change of unidirectional CFRP due to applied load. JSME Int J Ser A 2004; 47: 357–364.

23.

Todoroki

Tanaka

Shimamura

. Measurement of orthotropic electric conductance of CFRP laminates and analysis of the effect on delamination monitoring with an electric resistance change method. Compos Sci Technol 2002; 62: 619–628.

24.

Takahashi

Hahn

. Investigation of temperature dependency of electrical resistance changes for structural management of graphite/polymer composite. J Compos Mater 2011; 45: 2603–2611.

25.

Wasselynck

Trichet

Ramdane

. Interaction between electromagnetic field and CFRP materials: a new multiscale homogenization approach. IEEE Trans Magn 2010; 46: 3277–3280.

26.

Biro

. Edge element formulations of eddy current problems. Comput Methods Appl Mech Eng 1999; 169: 391–405.

27.

Kameari

. Regularization on ill-posed source terms in FEM computation using two magnetic vector potentials. IEEE Trans Magn 2004; 40: 1310–1313.

28.

Fukutomi

Takagi

Tani

. Numerical evaluation of ECT impedance signal due to minute cracks. IEEE Trans Magn 1997; 33: 2123–2126.

29.

Heremans

Olk

Morelli

. Magnetic susceptibility of carbon structures. Phys Rev B 1994; 49: 15122–15125.

30.

Pratap

Weldon

. Eddy current in anisotropic composites applied to pulsed machinery. IEEE Trans Magn 1996; 32: 437–444.

31.

Bossavit

. Whitney forms: a class of finite elements for three dimensional computations in electromagnetism. IEE Proc A (Physical Science, Measurement and Instrumentation, Management and Education, Reviews) 1988; 135: 493–500.

32.

Wasselynck

Trichet

Ramdane

. Microscopic and macroscopic electromagnetic and thermal modeling of carbon fiber reinforced polymer composites. IEEE Trans Mag 2011; 47: 1114–1117.

33.

Chen

Rebican

Miya

. Three-dimensional simulation of remote field ECT using the Ar method and a new formula for signal calculation. Res Nondestruct Eval 2005; 16: 35–53.

34.

Takagi

Hashimoto

Fukutomi

. Benchmark models of eddy current testing for steam generator tube: experiment and numerical analysis. Int J Appl Electromagn Mater 1994; 5: 149–162.

35.

Kameari

. Calculation of transient 3D eddy current using edge elements. IEEE Trans Magn 1990; 26: 466–469.

36.

Barton

Cendes

. New vector finite elements for three dimensional magnetic field computation. J Appl Phys 1987; 61: 3919–3921.

Novel electromagnetic modeling approach of carbon fiber-reinforced polymer laminate for calculation of eddy currents and eddy current testing signals

Abstract

Keywords

Get full access to this article

References