Sage Journals: Discover world-class research

Abstract

This paper presents the results of a study on the use of induction heating for rapid curing of a commercially available room-temperature curing paste adhesive, with a view to application in the repair of composite structures. The repair of damaged composite structures using adhesively bonded patches is often a very time-consuming process. This is partly due to the long times required for complete and satisfactory cure of the adhesive systems used. While the curing process can be accelerated by application of heat through devices such as heating blankets and lamps, these methods are inefficient since considerable heat is lost to the surrounding material and environment. The method of electromagnetic heating, however, is well suited for rapid and localized heating of the adhesive bondline provided suitable susceptors are used. In this paper, it is shown that induction heating can be successfully used to cure a room-temperature curing paste adhesive. Furthermore, results of single lap shear and double notched shear specimen tests show no substantial reduction in the strength of bonded joints with the use of embedded susceptors.

Keywords

induction adhesive bonded joints accelerated cure.

Get full access to this article

View all access options for this article.

References

1. Baker, A.A. 1993. Fatigue Fract. Engng. Mater Struct., 16:753-765.

2. Schwartz, M.M. 1994. Joining of Composite Matrix Materials. Materials Park, OH: ASM Inter-national.

3. Don, R.C. , McKnight, S.H. and Gillespie, J.W. Jr. 1994. Proceedings of 10th Annual ASM/ESD Advanced Composites Conference, Dearborn, Michigan, pp. 605-614.

4. Yarlagadda, S. , Fink, B.K. and Gillespie, J.W. Jr. 1998. J. Thermoplastic Composite Maters., 11:321-337.

5. McKnight, S.H. , Fink, B.K. , Wells, S. , Yarlagadda, S. and Gillespie, J.W. Jr. 1998. Proceedings of SPE ANTEC 98.

6. Fink, B.K. , McKnight, S.H. , Gillespie, J.W. Jr. and Yarlagadda, S. 1998. Proceedings of 21st Army Science Conference, Norfolk, VA.

7. Lee, D. and Han, C.D. 1994. Polymer Engng. & Sci., 34:742-794.

8. Kenny, J.M. , Apicella, A. and Nicolais, L. 1989. Polymer Engng. & Sci., 29:973-983.

9. Kamal, M.R. and Sourour, S. 1973. Polymer Engng. & Sci., 13:59-64.

10.

10. Whitney, J.M. 1997. Proceedings of the American Society for Composites, 12th Technical Conference, Dearborn, Michigan, Technomic Publishing Co., Lancaster, PA, pp. 746-755.