Sage Journals: Discover world-class research

Abstract

Although the current trend in dentin bonding favors the development of a hybrid layer interdiffusion zone for micromechanical bonding, the exact nature of the dentin-composite bond is still unclear. The objective of this study was to characterize the fracture surfaces of specimens used to measure interfacial fracture toughness. Morphological (SEM) and chemical (EDS and XPS) surface analyses were used for characterization. Fracture toughness specimens generally failed along the dentin-bonded interface in agreement with observed clinical failure modes.

Four sites of bond failure were identified within the dentin-composite interf aces when All-Bond 2, Scotchbond MultiPurpose, and Scotchbond 2 were used as the dentinal adhesives. These were located within (1) the smear layer, (2) a resin-modified layer between the interdiffusion zone and the adhesive resin, (3) a well-infiltrated hybrid interdiffusion zone, and (4) a non-infiltrated unsupported collagen layer.The interf acial region had a complex architecture which varied with the nature of the dentin, the dentin surface treatment, and the dentin bonding system. The sites of bond failure appeared to correlate with the interfacial fracture toughness and the extent to which polymerized resin infiltrated and acted to support the organic dentinal structures.

Keywords

Bonding Dental Materials Dentin Failure of Dental Materials Fractures

Get full access to this article

View all access options for this article.

References

Andrade J. (1985). Surface and interfacial aspects of biomedical polymers. 1. Surface chemistry and physics. New York: Plenum Press.

Cao Z. , Huang L. , Jiang J. (1992). A scanning electron microscopic observation of inner carious dentin after cleansing and of the dentin-resin interface. Quint Int 23:439-444.

Dental Advisor (1993). Dentin bonding agents and adhesive cements. 8:1-8.Eick J (1992). Smear layer-materials surface. Proc Finn Dent Soc 88:225-242.

Eliades G. , Palaghias G. , Vougiouklakis G. (1990). Surface reactions of adhesives on dentin. Dent Mater 6:208-216.

Gabriel B. (1985). SEM: A user's manual for materials science. Metals Park: American Society for Metals .

Gwinnett AJ , Kanca J. (1992). Micromorphology of the bonded dentin interface and its relationship to bond strength. Am J Dent 5:73-77.

Harnirattisai C. , Inokoshi S. , Shimada Y. , Hosoda H. (1992). Interfacial morphology of an adhesive composite resin and etched caries-affected dentin. OperDent 17:222-228.

Lee R. (1993). Scanning electron microscopy and x-ray microanalysis . Englewood Cliffs, NJ: PTR Prentice-Hall, Inc.

Misra D. (1989). Adsorption of 4-methacryloxyethyl trimellitate anhydride (4-META) on hydroxyapatite and its role in composite bonding. J Dent Res 68:42-47.

10.

Nakabayashi N. (1992a). Adhesive bonding with 4-META. Oper Dent 17(Suppl 5):125-130.

11.

Nakabayashi N. (1992b). The hybrid layer: a resin-dentin composite. Proc Finn Dent Soc 88(Suppl 1):321-329.

12.

Ozaki M. , Suzuki M. , Itoh K. , Wakumoto S. , Hisamitsu H. (1992). Laser-raman spectroscopic study of the adhesive interface ; analysis between 4-meta/ MMA-TBB resin and bovine or human dentin . Dent Mater J 11:70-76.

13.

Pashley D. (1992). Smear layer: overview of structure and function . Proc Finn Dent Soc 88:215-224.

14.

Prati C. , Biagini G. , Nucci C. , Castaldini C. , Zucchini C. (1990). Effects of chemical pretreatments on dentin bonding . Am J Dent 3:199-206.

15.

Ruse ND , Smith DC (1991). Adhesion to bovine dentin-surf ace characterization . J Dent Res 70:1002-1008.

16.

Spencer P. , Byerley TJ , Eick JD , Witt JD ( 1992). Chemical characterization of the dentin/adhesive interface by Fourier transform infrared photoacoustic spectroscopy. Dent Mater 8:10-15.

17.

Suzuki M. , Kato H. , Wakumoto S. (1991). Vibrational analysis by raman spectroscopy of the interface between dental adhesive resin and dentin. J Dent Res 70:1092-1097.

18.

Tam LE (1993). Fracture toughness and the dentin-composite interface (MSc Thesis). Toronto, ON, Canada: University of Toronto.

19.

Tam LE , Pilliar RM (1993). Fracture toughness of dentin/resin-composite adhesive interfaces. J Dent Res 72:953-959.

20.

Titley K. , Chernecky R. , Maric B. , Smith D. (1993). Studies of the dentin-bonding interface (abstract) . J Dent Res 72:263.

21.

Van Meerbeek B. , Dehm A. , Goret-Nicaise M. , Braem M. , Lambrechts P. , Vanherle G. (1993). Comparative SEM and TEM examination of the ultrastructure of the resin-dentin interdiffusion zone. J Dent Res 72:495-501.

22.

Van Meerbeek B. , Inokoshi S. , Braem M. , Lambrechts P. , Vanherle G. (1992). Morphological aspects of the resin-dentin interdiffusion zone with different dentin adhesive systems. J Dent Res 71:1530-1540.

23.

Watson T. (1989). A confocal microscope study of the morphology of the tooth/restoration interface using Scotchbond 2 Dentin Adhesive. J Dent Res 68:1124-1131.

24.

Wolinsky L. , Armstrong R. , Seghi R. (1993). The determination of ionic bonding interactions of N-phenyl glycine and N-(2-hydroxy-3-methacryloxypropyl)-N-phenylglycine as measured by carbon-3 NMR analysis. J Dent Res 72:72-77.

Fracture Surface Characterization of Dentin-bonded Interfacial Fracture Toughness Specimens

Abstract

Keywords

Get full access to this article

References