For higher generation of electricity from wind, efficient and cost-effective generators are being developed. Brushless doubly fed reluctance generator with a partially rated converter is one of the promising generators for wind power applications especially for offshore plants. All grid connected wind generators must comply with local grid codes and the prime requirement is reactive power capability. The capabilities of brushless doubly fed reluctance generator need to be investigated under grid connected operation. Therefore, a 2 kW laboratory prototype of this machine is optimally designed and constructed to study generator operation and reactive power capability. This article discusses the development of capability curve for brushless doubly fed reluctance generator from the well-known machine equations in d–q frame. The capability curves of this machine is also obtained from experimental investigations carried out on the 2 kW prototype. The results show that capability curve of brushless doubly fed reluctance generator looks to be ‘V’ shaped and suitable for wind generator applications.
AdemiSJovanovićMHasanM (2015) Control of brushless doubly fed reluctance generator for wind energy conversion systems. IEEE Transactions on Energy Conversion30(2): 596–604.
2.
AdemiSJovanovićM (2015) Vector control methods for brushless doubly fed reluctance machine. IEEE Transactions on Industrial Electronic62(1): 96–104.
AnderssonDPeterssonAAgneholmE, et al. (2007) Kriegers Flak. 640MW Off shore wind power grid connection – A real project case study. IEEE Transaction on Energy Conversion22(1): 79–85.
5.
BetzRJovanovićM (2000) The brushless doubly fed reluctance machine and the synchronous reluctance machine – A comparison. IEEE Transactions on Industry Applications36(4): 1103–1110.
6.
BetzRJovanovićM (2002) Theoretical analysis and control properties for brushless doubly fed reluctance machine. IEEE Transactions on Energy Conservation17(1): 332–339.
BetzRJovanovićM (2012) Introduction to the space vector modelling of the brushless doubly fed reluctance machine. Taylor and Francis journal on Electric Power Components and Systems31(8): 729–755.
9.
BhawalkarMPGopalakrishnanNNerkarY (2018) Chapter 3. Optimal design of brushless doubly fed reluctance machine. In Optimization and Control of Electrical Machine, pp. 33–53. Available at: http://dx.doi.org/10.5772/intechopen.74805
BublatTGehlhaarT (2008) Comparison of high technical demands on grid connected wind turbines defined in international Grid Codes. In: Proceedings of 7th international workshop on large scale integration of wind power and on transmission networks for offshore wind farms. Available at: https://studylib.net/doc/18716461/comparison-of-high-technical-demands-on-grid-connected-wind
12.
DorrellDJovanovićM (2008) On the possibilities of using brushless doubly fed reluctance generator in a 2 MW wind turbine. In: Proceedings of the IEEE industry applications society annual meeting, Edmonton, AB, Canada, 5–9 October, pp. 1–8. New York: IEEE.
EngelhartdtSErlichIFeltesC, et al. (2011) Reactive power capability of wind turbines based on doubly fed induction generator. IEEE Transactions on Energy Conservation26(1): 364–372.
ItaniSJoolsG (2012) Wind turbine generator controls: Meeting present and future grid code requirements. In: Proceedings of the CIGRE Session, Paris, August 2012, pp. 1–10.
17.
KnightABetzRDorrellD (2011) Design and analysis of brushless doubly fed reluctance machine. In: Proceedings of the IEEE Energy Conversion Congress and Exposition (ECCE), Phoenix, AZ, September, pp. 3128–3135. New York: IEEE.
18.
KundurP (2007) Power System Stability and Control (Third Reprint). New York: Tata McGraw Hill Publishing Company Limited.
19.
KunteSBhawalkarMGopalakrishnanN, et al. (2017) Optimal design and comparative analysis of different configurations of brushless doubly fed reluctance machine. IEEE Transactions on Industry Applications6(6): 1–11.
20.
LiaoYXuLZhenL (1996) Design of a doubly fed reluctance motor for adjustable speed drive. IEEE Transactions on Industry Applications32(5): 1195–1203.
21.
MurphyCKeaneA (2013) Optimization of wind farm reactive power for congestion management. In: Proceedings of the 2013 IEEE Grenoble conference, Grenoble, 16–20 June.
22.
NelsonRJ (2011) Review of existing standards for specifying wind turbine generator electrical performance: A 2010 year-end status report. In: Proceedings of the IEEE power and energy society general meeting, Detroit, MI, 24–28 July, pp. 1–5. New York: IEEE.
23.
NilssonNMercurioJ (1994) Synchronous generator capability curve testing and evaluation. IEEE Transactions on Power Delivery9(1): 414–424.
24.
North American Electric Reliability Corporation (NERC) (2018) NERC special assessment on interconnection requirements for variable generation. Available at: https://www.nerc.com/files/2012_IVGTF_Task_1-3.pdf.
25.
SayMG (1952) The Performance and Design of Alternating Current Machines (3rd edn). London: The English Language Book Society and Sir Isaac Pitman and Sons, Ltd.
26.
SinghSNØstergaardJSinghB (2011) Reactive power capability of Unified DFIG for wind power generation. In: Proceedings of the IEEE power and energy society general meeting, Providence, RI, 25–29 July, pp. 1–7. New York: IEEE.
27.
TsiliMPatsiourasCPapathanassiouS (2008) Grid code requirements for large wind farms: A review of technical regulations and available wind turbine technologies. In: Proceedings of European Wind Energy Conference, Brussels, 31 March–3 April 2008, pp. 1–10. Available at: https://mtsili.files.wordpress.com/2012/01/ceb318.pdf
28.
XuLLiangFLipoTA (1991) Transient model of a doubly excited reluctance motor. IEEE Transactions on Energy Conversion6(1): 126–133.
