This article concisely reviews the effects of sterilization on the mechanical properties and surface chemistries of implantable biomaterials. This article also summarizes the biological effects of the sterilization-related changes in the implant. Because there are so many different types of implant materials currently in use (including metals, polymers, and diverse biological materials), the response of tissue to these different materials varies dramatically. This review further discusses the effects of sterilization on in vivo and in vitro tissue response specifically to implantable metals and polyethylene, with the possibility of future biocompatibility testing of the implants sterilized with supercritical phase carbon dioxide sterilization.
McKellopH., ShenF.W., LuB., CampbellP., SaloveyR.Effect of sterilization method and other modifications on the wear resistance of acetabular cups made of ultra-high molecular weight polyethylene. A hip-simulator study. J Bone Joint Surg Am2000; 82-A: 1708–25.
2.
LehleK., LohnS., ReinerthG.G., SchubertT., PreunerJ.G., BirnbaumD.E.Cytological evaluation of the tissue-implant reaction associated with subcutaneous implantation of polymers coated with titaniumcarboxonitride in vivo. Biomaterials2004; 25: 5457–66.
3.
DoundoulakisJ.H.Surface analysis of titanium after sterilization: Role in implant-tissue interface and bioadhesion. J Prosthet Dent1987; 58: 471–8.
4.
KasemoB., LausmaaJ.Biomaterial and implant surfaces: On the role of cleanliness, contamination, and preparation procedures. J Biomed Mater Res1988; 22(suppl A2): S145–58.
5.
SadoudiA.K., HerryJ.M., CerfO.Elimination of adhering bacteria from surfaces by pulsed laser beams. Lett Appl Microbiol1997; 24: 177–9.
6.
WallenR.D., MayR., RiegerK., HollowayJ.M., CoverW.H.Sterilization of a new medical device using broad-spectrum pulsed light. Biomed Instrum Technol2001; 35: 323–30.
7.
DillowA.K., DehghaniF., HrkachJ.S., FosterN.R., LangerR.Bacterial inactivation by using near- and supercritical carbon dioxide. Proc Natl Acad Sci USA1999; 96: 10344–8.
8.
YoungJ.H.Steam sterilization: Scientific principles. In: ReichertM., YoungJ.H., eds. Sterilization technology for the health care facility.Gaithersburg, MD: Aspen Publishers; 1997. p 124–33.
9.
AlderV.G., SimpsonR.A.Heat sterilization: (A) Sterilization and disinfection by heat methods. In: RussellA.D., HugoW.B., AyliffeG.A.J., eds. Principles and practice of disinfection, preservation and Sterilization.Oxford: Blackwell Scientific; 1992. p 483–98.
10.
LinkA., ButtnerK.Steam sterilization: A suitable alternative?Med Device Technol1992; 3: 45–7.
VangsnessC.T.Jr., GarciaI.A., MillsC.R., KainerM.A., RobertsM.R., MooreT.M.Allograft transplantation in the knee: Tissue regulation, procurement, processing, and sterilization. Am J Sports Med2003; 31: 474–81.
13.
YoungJ.H.New sterilizaition technologies. In: ReichertM., YoungJ.H., eds. Sterilization technology for the health care facility.Gaithersburg, MD: Aspen Publishers; 1997. p 228–35.
14.
McNultyD.E., LiaoY.S., HaasB.D.The influence of sterilization method on wear performance of the low contact stress total knee system. Orthopedics2002; 25(suppl 2): S243–6.
15.
BaierR.E.Surface preparation. Int J Oral Implantol1988; 5: 15–9.
LerougeS., TabrizianM., WertheimerM.R., MarchandR., YahiaL.Safety of plasma-based sterilization: Surface modifications of polymeric medical devices induced by Sterrad and Plazlyte processes. Biomed Mater Eng2002; 12: 3–13.
OhkoY., UtsumiY., NiwaC., TatsumaT., KobayakawaK., SatohY., KubotaY., FujishimaA.Self-sterilizing and self-cleaning of silicone catheters coated with TiO(2) photocatalyst thin films: A preclinical work. J Biomed Mater Res2001; 58: 97–101.
22.
BakerC., PradhanA., PakstisL., PochanD.J., ShahS.I.Synthesis and antibacterial properties of silver nanoparticles. J Nanosci Nanotechnol2005; 5: 244–9.
23.
BorkowG., GabbayJ.Putting copper into action: Copper-impregnated products with potent biocidal activities. FASEB J2004; 18: 1728–30.
24.
BarbucciR., LeoneG., MagnaniA., MontanaroL., ArciolaC.R., LamponiS.Cu2+ and Ag+- complexes with a hyaluronane-based hydrogel. Journal of Material Chemistry2002; 12: 3084–92.
25.
NabloB.J., RothrockA.R., SchoenfischM.H.Nitric oxide-releasing sol-gels as antibacterial coatings for orthopedic implants. Biomaterials2005; 26: 917–24.
26.
VoteB.J., ElderM.J.Cyanoacrylate glue for corneal perforations: A description of a surgical technique and a review of the literature. Clin Experiment Ophthalmol2000; 28: 437–42.
27.
MontanaroL., ArciolaC.R., CenniE., CiapettiG., SavioliF., FilippiniF., BarsantiL.A.Cytotoxicity, blood compatibility and antimicrobial activity of two cyanoacrylate glues for surgical use. Biomaterials2001; 22: 59–66.
28.
LiX.Z., NikaidoH.Efflux-mediated drug resistance in bacteria. Drugs2004; 64: 159–204.
29.
JenningsB.R., RidlerP.J.Interaction of chromosomal stains with DNA. An electrofluorescence study. Biophys Struct Mech1983; 10: 71–9.
30.
SpoeringA.L., LewisK.Biofilms and planktonic cells of Pseudomonas aeruginosa have similar resistance to killing by antimicrobials. J Bacteriol2001; 183: 6746–51.
31.
MilovicN.M., WangJ., LewisK., KlibanovA.M.Immobilized N-alkylated polyethylenimine avidly kills bacteria by rupturing cell membranes with no resistance developed. Biotechnol Bioeng2005; 90: 715–22.
32.
BargmannL.S., BargmannB.C., CollierJ.P., CurrierB.H., MayorM.B.Current sterilization and packaging methods for polyethylene. Clin Orthop1999; 369: 49–58.
33.
BohlJ.R., BohlW.R., PostakP.D., GreenwaldA.S.The Coventry Award. The effects of shelf life on clinical outcome for gamma sterilized polyethylene tibial components. Clin Orthop Relat Res1999; 367: 28–38.
34.
CostaL., LudaM.P., TrossarelliL., Brach del PreverE.M., CrovaM., GallinaroP.Oxidation in orthopaedic UHMWPE sterilized by gamma-radiation and ethylene oxide. Biomaterials1998; 19: 659–68.
35.
GoldmanM., PruittL.Comparison of the effects of gamma radiation and low temperature hydrogen peroxide gas plasma sterilization on the molecular structure, fatigue resistance, and wear behavior of UHMWPE. J Biomed Mater Res1998; 40: 378–84.
36.
CurrierJ.H., DudaJ.L., SperlingD.K., CollierJ.P., CurrierB.H., KennedyF.E.In vitro simulation of contact fatigue damage found in ultra-high molecular weight polyethylene components of knee prostheses. Proc Inst Mech Eng [H]1998; 212: 293–302.
37.
WatanabeE., SuzukiM., NagataK., KaneedaT., HaradaY., UtsumiM., MoriA., MoriyaH.Oxidation-induced dynamic changes in morphology reflected on freeze-fractured surface of gamma-irradiated ultra-high molecular weight polyethylene components. J Biomed Mater Res2002; 62: 540–9.
38.
BakerD.A., HastingsR.S., PruittL.Study of fatigue resistance of chemical and radiation crosslinked medical grade ultrahigh molecular weight polyethylene. J Biomed Mater Res1999; 46: 573–81.
39.
CollierJ.P., SperlingD.K., CurrierJ.H., SutulaL.C., SaumK.A., MayorM.B.Impact of gamma sterilization on clinical performance of polyethylene in the knee. J Arthroplasty1996; 11: 377–89.
40.
BoyceT., EdwardsJ., ScarboroughN.Allograft bone. The influence of processing on safety and performance. Orthop Clin North Am1999; 30: 571–81.
41.
SauerW.L., WeaverK.D., BealsN.B.Fatigue performance of ultra-high-molecular-weight polyethylene: Effect of gamma radiation sterilization. Biomaterials1996; 17: 1929–35.
42.
InghamE., FisherJ.Biological reactions to wear debris in total joint replacement. Proc Inst Mech Eng [H]2000; 214: 21–37.
43.
RenoF., LombardiF., CannasM.UHMWPE oxidation increases granulocytes activation: A role in tissue response after prosthesis implant. Biomaterials2003; 24: 2895–900.
44.
AffatatoS., BordiniB., FagnanoC., TaddeiP., TintiA., ToniA.Effects of the sterilisation method on the wear of UHMWPE acetabular cups tested in a hip joint simulator. Biomaterials2002; 23: 1439–46.
ThierryB., TabrizianM., SavadogoO., YahiaL.Effects of sterilization processes on NiTi alloy: Surface characterization. J Biomed Mater Res2000; 49: 88–98.
47.
NuutinenJ.P., ClercC., VirtaT., TormalaP.Effect of gamma, ethylene oxide, electron beam, and plasma sterilization on the behaviour of SR-PLLA fibres in vitro. J Biomater Sci Polym Ed2002; 13: 1325–36.
48.
ZhangY.Z., BjurstenL.M., Freij-LarssonC., KoberM., WesslenB.Tissue response to commercial silicone and polyurethane elastomers after different sterilization procedures. Biomaterials1996; 17: 2265–72.
49.
MatthewsI.P., GibsonC., SamuelA.H.Sterilisation of implantable devices. Clin Mater1994; 15: 191–215.
50.
StanfordC.M., KellerJ.C., SolurshM.Bone cell expression on titanium surfaces is altered by sterilization treatments. J Dent Res1994; 73: 1061–71.
51.
BaierR.E., MeyerA.E., AkersC.K., NatiellaJ.R., MeenaghanM., CarterJ.M.Degradative effects of conventional steam sterilization on biomaterial surfaces. Biomaterials1982; 3: 241–5.
52.
LausmaaJ., KasemoB., HanssonS.Accelerated oxide growth on titanium implants during autoclaving caused by fluorine contamination. Biomaterials1985; 6: 23–7.
53.
KellerJ.C., DraughnR.A., WightmanJ.P., DoughertyW.J., MeletiouS.D.Characterization of sterilized CP titanium implant surfaces. Int J Oral Maxillofac Implants1990; 5: 360–7.
54.
UngersbockA., PohlerO., PerrenS.M.Evaluation of the soft tissue interface at titanium implants with different surface treatments: Experimental study on rabbits. Biomed Mater Eng1994; 4: 317–25.
55.
MatlagaB.F., YasenchakL.P., SalthouseT.N.Tissue response to implanted polymers: The significance of sample shape. J Biomed Mater Res1976; 10: 391–7.
56.
WoodwardS.C., SalthouseT.N.The tissue response to implant and its evaluation by light microscopy. In: von RecumA.F., ed. Handbook of biomaterials evaluation.New York: Macmillan; 1986. p 364–77.
57.
CampbellC.E., von RecumA.F.Microtopography and soft tissue response. J Invest Surg1989; 2: 51–74.
58.
DrakeD.R., PaulJ., KellerJ.C.Primary bacterial colonization of implant surfaces. Int J Oral Maxillofac Implants1999; 14: 226–32.
59.
SwartK.M., KellerJ.C., WightmanJ.P., DraughnR.A., StanfordC.M., MichaelsC.M.Short-term plasma-cleaning treatments enhance in vitro osteoblast attachment to titanium. J Oral Implantol1992; 18: 130–7.
60.
YoungbloodT., OngJ.L.Effect of plasma-glow discharge as a sterilization of titanium surfaces. Implant Dent2003; 12: 54–60.
61.
UngersbockA., PohlerO.E., PerrenS.M.Evaluation of soft tissue reactions at the interface of titanium limited contact dynamic compression plate implants with different surface treatments: An experimental sheep study. Biomaterials1996; 17: 797–806.
62.
TherinM., MeunierA., ChristelP.A histomorphometric comparison of the muscular tissue reaction to stainless steel, pure titanium and titanium alloy implant materials. J Mater Sci Mater Med1991; 2: 1–8.
63.
McNamaraA., WilliamsD.F.The response to the intramuscular implantation of pure metals. Biomaterials1981; 2: 33–40.
64.
von RecumA.F.Soft-tissue adhesion to implant materials. In: EsterhaiJ.L., GristinaA.G., PossR., eds. Musculoskeletal Infection.Park Ridge, IL: Am Acad Orthop Surgeons; 1992. p 191–203.
65.
HartmanL.C., MeenaghanM.A., SchaafN.G., HawkerP.B.Effects of pretreatment sterilization and cleaning methods on materials properties and osseoinductivity of a threaded implant. Int J Oral Maxillofac Implants1989; 4: 11–8.
66.
BuddT.W., BielatK.L., MeenaghanM.A., SchaafN.G.Microscopic observations of the bone/implant interface of surface-treated titanium implants. Int J Oral Maxillofac Implants1991; 6: 253–8.
67.
MeenaghanM.A., NatiellaJ.R., MoresiJ.L., FlynnH.E., WirthJ.E., BaierR.E.Tissue response to surface-treated tantalum implants: Preliminary observations in primates. J Biomed Mater Res1979; 13: 631–43.
68.
PiattelliA., DegidiM., PaolantonioM., ManganoC., ScaranoA.Residual aluminum oxide on the surface of titanium implants has no effect on osseointegration. Biomaterials2003; 24: 4081–9.
69.
MullerT.F., SeitzM., EckleI., LangeH., KolbG.Biocompatibility differences with respect to the dialyzer sterilization method. Nephron1998; 78: 139–42.
70.
Cardenas-CamarenaL.Ethylene oxide burns from improperly sterilized mammary implants. Ann Plast Surg1998; 41: 361–6.
71.
LinkowL.I., GiauqueF.Introduction to plasma glow discharge treatment of dental implants. Implant Soc1993; 4: 15–6.
72.
SerroA.P., SaramagoB.Influence of sterilization on the mineralization of titanium implants induced by incubation in various biological model fluids. Biomaterials2003; 24: 4749–60.
