Sage Journals: Discover world-class research

Abstract

A pilot scale test facility of a circulating fluidized bed incinerator was established to generate design and operation data and help assess the technical feasibility for industrial applications. The use of high turbulence in the combustion zone and feeding an acid-capturer directly into the incinerator to absorb acid gases eliminates the costly afterburner and scrubber. This paper presents some systematic incineration tests of uniform industrial wastes such as paper mill sludge cake, rubber waste and petroleum coke. Sludge cakes with high moisture and low heating values can be treated to a low emission level by co-firing with coal. The high superficial gas velocity has improved combustion efficiency but increases NO_x emissions. However, sulphur content has almost no influence on sulphur retention. The problems of CO/NO_x emissions and circulation stability are also discussed.

Keywords

Fluidized bed combustion industrial solid waste incineration NOx emission SOx emission CO emission.

Get full access to this article

View all access options for this article.

References

Barner, H.E. & Chaster, J.S. (1985) Application of circulating fluid bed technology to the combustion of waste material. Environmental Progress 4(2), 125-130.

Behmanesh, N. , Manousiouthakis, V. & Allen, D.T. (1990) Optimizing the throughput of hazardous waste incinerators . American Institute of Chemical Engineer Journal 36(11), 1707-1714.

Berge, N. (1988) NOx control in a circulating fluidized bed combustor . In Circulating fluidized bed technology II ( P. Basu & J. F. Large , eds). Oxford, U.K.: Pergamon Press, pp. 421-428.

Borgwardt, R.H. & Harvey, R.D. (1972) Properties carbonate rocks related to SOx reactivity . Environmental Science Technology 6, 350-360.

Chang, Y.M. (1989) An introduction to sludge incineration. Journal of Industrial Pollution Control (Taiwan) 8(4), 104-118.

Chang Y.M. , Lo, Y.F. & Ho, C.C. (1991) Application of fluidized bed combustion to industrial waste treatment. Environmental Pollution 71(1), 31-42.

Davidson, J.F. , Clift, R. & Harrison, D. (1985) Fluidization (2nd edition). London: Academic Press, Chap. 7.

Fujima, Y. , Fjioka, Y. , Hino, H. & Takamoku, H. (1985) Experimental study on sulfur retention in CFBC . In Proceedings of the First International Conference on Circulating Fluidized Beds, Nova Scotia, Canada, November 18-20, pp. 239-246.

Griffin, R.D. (1985) A new theory of dioxin formation in municipal solid waste combustion. In The 78th Annual Meeting of the Air Pollution Control Assocation, Detroit, Michigan U.S.A., June 16-21.

10.

Howard, J.R. (1983) Fluidized bed—combustion and application. London, U.K.: Applied Science Publishers.

11.

Knowlton, T.M. (1988) Non-mechanical solid feed and recycle devices for circulating fluidized bed. In Circulating Fluidized Bed Technology II ( P. Basu & J. F. Large , eds). Oxford , U.K.: Pergamon Press, pp. 31-42.

12.

Lee, C.C. & Huffman, G.L. (1989) Incineration of solid waste. Environmental Progress 8(3), 143-151.

13.

Oppelt, E.T. (1987) Incineration of hazardous waste-a critical review . Journal of Air Pollution Control Association 37(5), 558-586.

14.

Radovanovic, M. (1986) Fluidized Bed Combustion. New York, U.S.A.: Hemisphere Publishing Co., pp. 160-161.

15.

Rickman, W.S. , Holder, N.D. & Young, D.T. (1985) Circulating bed incineration of hazardous wastes . Chemical Engineering Progress March, 34-38.

16.

Siebert, P.C. & Alston, D.R. (1991) Toxic trace pollutants from incineration. Environmental Progress 10(1), 1-12.

17.

Theodore, L. & Reynolds, J. (1987) Introduction to hazardous waste incineration. New York, U.S.A.: John Wiley & Sons.

18.

Yerushalmi, J. , Turner, D.H. & Squires, A.M. (1976) The fast fluidized bed. Industrial & Engineering Chemistry-Process Design & Development 15, 47-58.

19.

Zhe, H. & Yang, W. (1988) Study on the operation stability of laboratory scale circulating fluidized bed. In Circulating Fluidized Bed Technology II ( P. Basu & J. F. Large , eds). Oxford, U.K.: Pergamon Press, pp. 317-326.

Circulating Fluidized Bed Incineration of Industrial Solid Wastes

Abstract

Keywords

Get full access to this article

References