To enable self-sustaining long-lasting wireless condition monitoring sensors, a small mechanical vibration energy harvester using electromagnetic transduction was constructed and used to harvest vibrations from large industrial pump motors and machine tool. The prototype harvester was roughly the size of a cube with 2.5 cm long sides. Power ranging from 0.2 to 1.5 mW was harvested from 15 to 30 kW water pump motors. For a machine tool, metal cutting vibrations and rapid jog events were explored as possible harvestable sources of energy. Power ranging from 0.9 to 1.9 mW was harvested during facemilling operations, and it was shown that rapid jog events could be harvested. The power levels harvested from the pump motors and machine tools are sufficient to provide the time-averaged power requirements of commercial wireless sensor nodes, enabling sensor nodes to overcome the finite life of replaceable batteries.
KahnJMKatzRHPisterKSJ. Next century challenges: Mobile networking for “Smart Dust”. Proceedings of the 5th annual ACM/IEEE international conference on mobile computing and networking. 15–19 August 1999. Seattle, WA, pp. 271–278.
4.
WarnekeBLastMLiebowitzB. Smart dust: Communicating with a cubic-millimeter computer. Computer2001; 34(1): 44–51.
5.
HillJCullerD. MICA: A wireless platform for deeply embedded networks. IEEE Micro2002; 22(6): 12–24.
6.
CheeYHKoplowMMarkM. PicoCube: A 1 cm 3 sensor node powered by harvested energy. Proceedings of the 45th ACM/IEEE design and automation conference. 8–13 June 2008. Anaheim, CA, pp. 114–119.
7.
DargieWPoellabauerC. Fundamentals of wireless sensor networks: Theory and practice, Singapore: John Wiley & Sons Ltd, 2010, pp. 1–10.
Vyas R, Lakafosis V and Tentzeris M. Wireless remote localization system utilizing ambient RF/solar power scavenging RFID tags. In: IEEE MTT-S internationalmicrowave symposium digest, Anaheim, CA, 23–28 May 2010, pp.1764–1767.
10.
DalolaSFerrariVGuizzettiM. Autonomous sensor system with power harvesting for telemetric temperature measurements of pipes. IEEE Trans Instrum Meas2009; 58(5): 1471–1478.
Vyas R, Lakafosis V, Tentzeris M, et al. A battery-less, wireless mote for scavenging wireless power at UHF (470-570 MHz) frequencies. In: Proceedings of the 2011 IEEE international symposium on antennas and propagation (APSURSI), Spokane, WA, 3–8 July 2011, pp.1069–1072.
13.
Mark M, Chen Y, Sutardja C, et al. A 1 mm3 2 Mbps 330 fJ/b transponder for implanted neural sensors. In: Proceedings of 2011 symposium on VLSI circuits, Kyoto, Japan, 15–17 June 2011, pp.168–169.
14.
WilliamsCBYatesRB. Analysis of a micro-electric generator for microsystems. Sens Actuators A1996; 52(1–3): 8–11.
15.
Roundy S. Energy scavenging for wireless sensor nodes with a focus on vibration to electricity conversion. PhD Thesis, University of California, Berkeley, CA, 2003.
16.
NguyenDSHalvorsenEJensenGU. Fabrication and characterization of a wideband MEMS energy harvester utilizing nonlinear springs. J Micromech Microeng2010; 20: 125009 (11pp)–125009 (11pp).
17.
EdamotoMSuzukiYKasagiN. Low-resonant-frequency micro electret generator for energy harvesting application. Proceedings of the 22nd international conference on micro electro mechanical systems. 25–29 January 2009. Sorrento, Italy, pp. 1059–1062.
18.
RoundySLelandESBakerJ. Improving power output for vibration-based energy scavengers. IEEE Pervasive Comput2005; 4(1): 28–36.
19.
TorahRGlynne-JonesPTudorM. Self-powered autonomous wireless sensor node using vibration energy harvesting. Meas Sci Technol2008; 19(12): 125202 (8pp)–125202 (8pp).
20.
DallagoEMarchesiMVenchiG. Analytical model of a vibrating electromagnetic harvester considering nonlinear effects. IEEE Trans Power Electron2010; 25(8): 1989–1997.
BeebySPTudorMJKoukharenkoE. Design and performance of a microelectromagnetic vibration powered generator. The digest of technical papers for the 13th international conference on solid-state sensors, actuators and microsystems (TRANSDUCERS ‘05), IEEE, Seoul. 5–9 June 2005. Korea, pp. 780–783.
23.
SahaCRO’DonnellTLoderH. Optimization of an electromagnetic energy harvesting device. IEEE Trans Magn2006; 42(10): 3509–3511.
24.
ChaiH-D. Electromechanical motion devices, Upper Saddle River, NJ: Prentice Hall PTR, 1998, pp. 64–64.
25.
Pister KJ. EE290Q: Introduction to wireless sensor networks. University of California, Berkeley, CA, 2009.
26.
Waterbury AC. Vibration harvesting using electromagnetic transduction. PhD Thesis, University of California, Berkeley, CA, 2011.
27.
SolimanMSMAbdel-RahmanEMEl-SaadanyEF. A wideband vibration-based energy harvester. J Micromech Microeng2008; 18(11): 115021 (11pp)–115021 (11pp).
28.
MarzenckiMDefosseuxMBasrourS. MEMS vibration energy harvesting devices with passive resonance frequency adaptation capability. J Microelectromech Syst2009; 18(6): 1444–1453.
29.
BeebySPTorahRNTudorMJ. A micro electromagnetic generator for vibration energy harvesting. J Micromech Microeng2007; 17(7): 1257–1265.
30.
ArnoldDP. Review of microscale magnetic power generation. IEEE Trans Magn2007; 43(11): 3940–3951.
31.
MitchesonPDYeatmanEMRaoGK. Energy harvesting from human and machine motion for wireless electronic devices. Proc IEEE2008; 96(9): 1457–1486.
32.
Seeman MD, Sanders SR and Rabaey JM. An ultra-low-power power management IC for wireless sensor nodes. In: Proceedings of the 2007 custom integrated circuits conference, IEEE, San Jose, CA, 16–10 September 2007, pp.567–570.
33.
SeemanMDSandersSRRabaeyJM. An ultra-low-power power management IC for energy-scavenged wireless sensor nodes. Proceedings of the 2008 power electronics specialists conference (PESC 2008), IEEE, Rhodes. 15–19 June 2008. Greece, pp. 925–931.
34.
MitchesonPDReillyEKTohT. Performance limits of the three MEMS inertial energy generator transduction types. J Micromech Microeng2007; 17: S211–S216.
