Sage Journals: Discover world-class research

Abstract

The present study aims at providing a topology optimization of multi-material compliant mechanisms using solid isotropic material with penalization (SIMP) approach. In this respect, three multi-material gripper, invertor, and cruncher compliant mechanisms are considered that consist of three solid phases, including polyamide, polyethylene terephthalate, and polypropylene. The alternating active-phase algorithm is employed to find the distribution of the materials in the mechanism. In this case, the multiphase topology optimization problem is divided into a series of binary phase topology optimization sub-problems to be solved partially in a sequential manner. Finally, the maximum displacement of the multi-material compliant mechanisms was validated against the results obtained from the finite element simulations by the ANSYS Workbench software, and a close agreement between the results was observed. The results reveal the capability of the SIMP method to accurately conduct the topology optimization of multi-material compliant mechanisms.

Keywords

Topology optimization multi-material compliant mechanisms solid isotropic material with penalization alternating active phase algorithm

Get full access to this article

View all access options for this article.

References

Bendsøe

Kikuchi

. Generating optimal topologies in structural design using a homogenization method. Comput Methods Appl Mech Eng 1988; 71: 197–224.

Ananthasuresh G, Kota S and Gianchandani Y. A methodical approach to the design of compliant micromechanisms. In: Solid-state sensor and actuator workshop, 1994, pp.189–192. South Carolina: IEEE.

Jin

Zhang

. A new topology optimization method for planar compliant parallel mechanisms. Mech Mach Theory 2016; 95: 42–58.

Zhu

Chen

Jin

, et al. Design of fully decoupled compliant mechanisms with multiple degrees of freedom using topology optimization. Mech Mach Theory 2018; 126: 413–428.

Qiu

Yue

Xie

. Design and analysis of multicavity flexure hinge (MCFH) based on three-dimensional continuum topology optimization. Mech Mach Theory 2019; 139: 21–33.

Liu

C-H

Chiu

C-H

Chen

T-L

, et al. Topology optimization and prototype of a three-dimensional printed compliant finger for grasping vulnerable objects with size and shape variations. J Mech Robot 2018; 10: 044502-01 - 044502-09–044502-01 - 044502-09.

Bai

Zuo

. Hollow structural design in topology optimization via moving morphable component method. Struct Multidiscipl Optim 2020; 61: 187–205–187–205.

Guo

Zhang

Zhong

. Doing topology optimization explicitly and geometrically – a new moving morphable components based framework. J Appl Mech 2014; 81: 081009-01 - 081009-12–081009-01 - 081009-12.

Sigmund

Torquato

. Composites with extremal thermal expansion coefficients. Appl Phys Lett 1996; 69: 3203–3205.

10.

Yin

Ananthasuresh

. Topology optimization of compliant mechanisms with multiple materials using a peak function material interpolation scheme. Struct Multidiscipl Optim 2001; 23: 49–62.

11.

Zuo

Saitou

. Multi-material topology optimization using ordered SIMP interpolation. Struct Multidiscipl Optim 2017; 55: 477–491.

12.

Conlan-Smith

Bhattacharyya

James

. Optimal design of compliant mechanisms using functionally graded materials. Struct Multidiscipl Optim 2018; 57: 197–212.

13.

Wang

Luo

Kang

, et al. A multi-material level set-based topology and shape optimization method. Comput Methods Appl Mech Eng 2015; 283: 1570–1586.

14.

Xiao

Chu

Gao

, et al. A hybrid method for density-related topology optimization. Int J Comput Methods 2019; 16: 1850116–1850116.

15.

Chu

Xiao

Gao

, et al. Topology optimization of multi-material structures with graded interfaces. Comput Methods Appl Mech Eng 2019; 346: 1096–1117.

16.

Chu

Gao

Xiao

, et al. Stress-based multi-material topology optimization of compliant mechanisms. Int J Numer Methods Eng 2018; 113: 1021–1044.

17.

Chu

Xiao

Gao

, et al. A level set-based method for stress-constrained multimaterial topology optimization of minimizing a global measure of stress. Int J Numer Methods Eng 2019; 117: 800–818.

18.

Wang

Gao

Luo

, et al. Level-set topology optimization for multimaterial and multifunctional mechanical metamaterials. Engineering Optimization 2017; 49: 22–42. DOI: https://doi.org/10.1080/0305215X.2016.1164853.

19.

Conlan-Smith

James

. A stress-based topology optimization method for heterogeneous structures. Structural and Multidisciplinary Optimization 2019; 60: 167–183. DOI: https://doi.org/10.1007/s00158-019-02207-9.

20.

Tavakoli

Mohseni

. Alternating active-phase algorithm for multimaterial topology optimization problems: a 115-line MATLAB implementation. Structural and Multidisciplinary Optimization 2014; 49: 621–642.

21.

Wang

Zhang

. Hierarchical optimization for topology design of multi-material compliant mechanisms. Eng Optim 2017; 49: 2013–2035.

22.

Querin

Victoria

Gordoa

, et al. Topology design methods for structural optimization, Amsterdam: Elsevier Science, 2017.

23.

Frecker

Ananthasuresh

Nishiwaki

, et al. Topological synthesis of compliant mechanisms using multi-criteria optimization. J Mech Des 1997; 119: 238–245.

24.

Bendsoe

. Optimization of structural topology, shape, and material, Berlin: Springer Berlin Heidelberg, 2013.

25.

Zhou

Wang

. Multimaterial structural topology optimization with a generalized Cahn–Hilliard model of multiphase transition. Struct Multidiscipl Optim 2006; 33: 89–89.

26.

Andreassen

Clausen

Schevenels

, et al. Efficient topology optimization in MATLAB using 88 lines of code. Struct Multidiscipl Optim 2011; 43: 1–16.

Supplementary Material

Please find the following supplemental material available below.

For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.

For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.

0.08 MB

0.00 MB

Multi-material topology optimization of compliant mechanisms via solid isotropic material with penalization approach and alternating active phase algorithm

Abstract

Keywords

Get full access to this article

References

Supplementary Material