Sage Journals: Discover world-class research

Abstract

A shell and tube heat exchanger with staggered baffles (STHX-ST) is designed by integrating the features of both segmental and helical baffles, which produces a helical flow in the shell side. This work studies the effect of different parameters on the performance of the STHX-ST through numerical analysis. Shell inner diameter, tube outer diameter, baffle cut, baffle spacing, and baffle orientation angle are the design parameters. Multi-objective optimization using genetic algorithm (GA) is carried out to maximize the heat transfer rate while minimizing the pressure drop. The objective functions for optimization are approximated using artificial neural networks (ANNs). The training data for ANNs are simulated from CFD analysis as per the Taguchi orthogonal test table. The optimal solution obtained from the Pareto front has a maximum heat transfer of 154555 W for a minimum pressure drop of 88083.86 Pa.

Keywords

Design optimization heat exchanger artificial neural network genetic algorithm

Get full access to this article

View all access options for this article.

References

Wang

Zheng

Liu

, et al. Numerical analysis and optimization study on shell-side performances of a shell and tube heat exchanger with staggered baffles. Int J Heat Mass Transfer 2018; 124: 247–259.

Mellal

Benzeguir

Sahel

, et al. Hydro-thermal shell-side performance evaluation of a shell and tube heat exchanger under different baffle arrangement and orientation. Int J Therm Sci 2017; 121: 138–149.

Shinde

Chavan

Numerical and experimental analysis on shell side thermo-hydraulic performance of shell and tube heat exchanger with continuous helical FRP baffles. Therm Sci Eng Progr 2018; 5: 158–171.

Pal

Kumar

Joshi

, et al. CFD simulations of shell-side flow in a shell-and-tube type heat exchanger with and without baffles. Chem Eng Sci 2016; 143: 314–340.

Bichkar

Dandgaval

Dalvi

, et al. Study of shell and tube heat exchanger with the effect of types of baffles. Proc Manuf 2018; 20: 195–200.

Maakoul

Laknizi

Saadeddine

, et al. Numerical comparison of shell-side performance for shell and tube heat exchangers with trefoil-hole, helical and segmental baffles. Appl Therm Eng 2016; 109: 175–185.

Abd

Kareem

Naji

SZ.

Performance analysis of shell and tube heat exchanger: parametric study. Case Stud Therm Eng 2018; 12: 563–568.

Luo

Xiong

, et al. Numerical and experimental investigation of the heat exchanger with trapezoidal baffle. Int J Heat Mass Transfer 2018; 127: 598–606.

Numerical investigation on double tube-pass shell-and-tube heat exchangers with different baffle configurations. Appl Therm Eng 2018; 143: 561–569.

10.

Saijal

Ganguli

Viswamurthy

SR.

Optimization of helicopter rotor using polynomial and neural network metamodels. J Aircraft 2011; 48: 553–566.

11.

Sukumar

Ramaiah

Nagarjuna

Optimization and prediction of parameters in face milling of Al-6061 using Taguchi and ANN approach. Proc Eng 2014; 97: 365–371.

12.

Kodakkattu

Joy

Nair

KP.

Vibration reduction of helicopter with trailing-edge flaps at various flying conditions. Proc IMechE, Part G: J Aerospace Engineering 2017; 231: 770–784.

13.

Reynolds

Rezgui

Kwan

, et al. A zone-level, building energy optimisation combining an artificial neural network, a genetic algorithm, and model predictive control. Energy 2018; 151: 729–739.

14.

Zhao

Zhang

, et al. Optimization and matching for range-extenders of electric vehicles with artificial neural network and genetic algorithm. Energy Convers Manage 2019; 184: 709–725.

15.

Krzywanski

Grabowska

Herman

, et al. Optimization of a three-bed adsorption chiller by genetic algorithms and neural networks. Energy Convers Manage 2017; 153: 313–322.

16.

Kahani

Ghazvini

Mohseni-Gharyehsafa

, et al. Application of M5 tree regression, MARS, and artificial neural network methods to predict the nusselt number and output temperature of CuO based nanofluid flows in a car radiator. Int Commun Heat Mass Transfer 2020; 116: 104667.

17.

Nasirzadehroshenin

Sadeghzadeh

Khadang

, et al. Modeling of heat transfer performance of carbon nanotube nanofluid in a tube with fixed wall temperature by using ANN-GA. Eur Phys J Plus 2020; 135: 1–20.

18.

Ahmadi

Ghazvini

Maddah

, et al. Prediction of the pressure drop for CuO/(ethylene glycol-water) nanofluid flows in the car radiator by means of artificial neural networks analysis integrated with genetic algorithm. Physica A: Stat Mech Appl 2020; 546: 124008.

19.

Ahmadi

Mohammadi

Dehghani

, et al. Multi-objective thermodynamic-based optimization of output power of solar Dish-Stirling engine by implementing an evolutionary algorithm. Energy Convers Manage 2013; 75: 438–445.

20.

Ahmadi

Mellit

, et al. Thermodynamic analysis and multi objective optimization of performance of solar Dish Stirling engine by the centrality of entransy and entropy generation. Electr Power Energy Syst 2016; 78: 88–95.

21.

Ahmadi

Sadatsakkak

SA.

Thermodynamic analysis and performance optimization of irreversible Carnot refrigerator by using multi-objective evolutionary algorithms (MOEAs). Renew Sustain Energy Rev 2015; 51: 1055–1070.

22.

Parvizi

Raftar

HRR.

Application of artificial neural network and genetic algorithm to predict and optimize load and torque in T-section profile ring rolling. Proc IMechE, Part C: J Mechanical Engineering Science 2019; 233: 5966–5976.

23.

Ansaripour

Heidari

Eftekhari

SA.

Multi-objective optimization of residual stresses and distortion in submerged arc welding process using genetic algorithm and harmony search. Proc IMechE, Part C: J Mechanical Engineering Science 2019; 4: 862–871.

Supplementary Material

Please find the following supplemental material available below.

For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.

For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.

0.02 MB

1.86 MB

0.00 MB

Design optimization of a shell and tube heat exchanger with staggered baffles using neural network and genetic algorithm

Abstract

Keywords

Get full access to this article

References

Supplementary Material