Sitting on a chair is an essential part of daily life, however the posture is a heavy burden on the lower back, leading to lower back pain.
Objective
In this study, lumbar stress distribution was analyzed when sitting on a chair with different backrest inclination, sitting distance and seat pan inclination in order to visualize the stress on intervertebral discs and sacroiliac joints (SIJs).
Methods
Body pressure distribution was measured on backrests and seat pans of six subjects. Each sitting posture on a chair was reproduced using a finite element model of a spine and pelvis, and the stress distribution in the lower back was analyzed based on the results of the body pressure distribution measurements.
Results
When the seat pan was tilted forward, the pressure on the backrest decreased, whereas the pressure increased with large sitting distance. Finite element analyses showed that equivalent stresses on the SIJs and intervertebral discs was decreased when sitting on a chair shallowly and with the seat pan tilted forward.
Conclusion
Both sitting shallowly and with a forward-tilted seat are postures that increase the trunk-thigh angle, and the load on the lower back was reduced by reducing the moment applied to the sacrum.
KitayamaAKoohsariMJIshiiK, et al.Sedentary time in a nationally representative sample of adults in Japan: prevalence and sociodemographic correlates. Prev Med Rep2021; 23: 101439.
2.
ShingaiMMurayamaAMukaiS. Basic survey of physiotherapists’ low back pain experience and posture recognition in the sitting position. Rigakuryoho Kagaku2021; 36: 807–812. (in Japanese).
3.
SasakiTKurosawaDMurakamiE, et al.Comparison of rolling over time and sitting duration time between patients with sacroiliac joint disorder and with lumbar disorders. Rinsho Seikei Geka2020; 71: 1365–1369. (in Japanese).
4.
VenayreBKoyamaYKurosawaD, et al.Quantitative evaluation of the sacroiliac joint fixation in stress reduction on both sacroiliac joint cartilage and ligaments: a finite element analysis. Clin Biomech2021; 85: 105350.
5.
NachemsonA. Towards a better understanding of low-back pain: a review of the mechanics of the lumbar disc. Rheumatol Rehabil1975; 14: 129–143.
6.
WaongenngarmPRajaratnamBSJanwantanakulP. Perceived body discomfort and trunk muscle activity in three prolonged sitting postures. J Phys Ther Sci2015; 27: 2183–2187.
7.
ToyoharaRKurosawaDHammerN, et al.Finite element analysis of load transition on sacroiliac joint during bipedal walking. Sci Rep2020; 10: 13683.
8.
HarrisonDDHarrisonSOCroftAC, et al.Sitting biomechanics part I: review of the literature. J Manipulative Physiol Ther1999; 22: 594–609.
9.
BozzoIMalzB. Finite element study of sitting configurations to reduce sacroiliac joint loads. Mcgill J Med2020; 18. DOI: 10.26443/mjm.v18i1.308
10.
WatsonPJDostanporAFaganMJ, et al.The effect of boundary constraints on finite element modelling of the human pelvis. Med Eng Phys2017; 43: 48–57.
11.
XuGLiangZTianT, et al.Development of a finite element full spine model with active muscles for quantitatively analyzing sarcopenia effects on lumbar load. Comput Methods Programs Biomed2023; 240: 107709.
12.
HammerNSteinkeHLingslebeU, et al.Ligamentous influence in pelvic load distribution. Spine J2013; 13: 1321–1330.
13.
KamioTSakamotoJHatoT, et al.A study of mechanical evaluation of reconstructed structure for compressive fracture of spine. Proc Annu Meeting of JSME/MMD2003; 2003: 681–682. (in Japanese).
14.
LevyAKopplinKGefenA. An air-cell-based cushion for pressure ulcer protection remarkably reduces tissue stresses in the seated buttocks with respect to foams: finite element studies. J Tissue Viability2014; 23: 13–23.
15.
MajumderSRoychowdhuryAPalS. Simulation of hip fracture in sideways fall using a 3D finite element model of pelvis-femur-soft tissue complex with simplified representation of whole body. Med Eng Phys2007; 29: 1167–1178.
16.
SteinkeHLingslebeUBöhmeJ, et al.Deformation behavior of the iliotibial tract under different states of fixation. Med Eng Phys2012; 34: 1221–1227.
17.
Bruna-RossoCArnouxPJBiancoRJ, et al.Finite element analysis of sacroiliac joint fixation under compression loads. Int J Spine Surg2016; 10: 16.
18.
KurataNKurataSKurataT. Measurement method of seven body region weights by use of a body-region separately weighing system. Trans JSMBE2012; 50: 637–644. (in Japanese).
19.
KibsgårdTJRøiseOStugeB, et al.Precision and accuracy measurement of radiostereometric analysis applied to movement of the sacroiliac joint. Clin Orthop Relat Res2012; 470: 3187–3194.
20.
ZenkRFranzMBubbH, et al.Technical note: spine loading in automotive seating. Appl Ergon2012; 43: 290–295.
21.
Al-DiriniRMReedMPHuJ, et al.Development and validation of a high anatomical fidelity FE model for the buttock and thigh of a seated individual. Ann Biomed Eng2016; 44: 2805–2816.
22.
HuangMHajizadehKGibsonI, et al.The influence of various seat design parameters: a computational analysis. Hum Factor Ergon Man2016; 26: 356–366.
23.
ChoMHanJSKangS, et al.Biomechanical effects of different sitting postures and physiologic movements on the lumbar spine: a finite element study. Bioengineering2023; 10: 1051.
24.
FujitaniRJiroumaruTNoguchiS, et al.Effect of low back pain on the muscles controlling the sitting posture. J Phys Ther Sci2021; 33: 295–298. (in Japanese).
25.
LiWMoRYuS, et al.The effects of the seat cushion contour and the sit-ting posture on surface pressure distribution and comfort during seated work. Int J Occup Med Environ Health2020; 33: 675–689.
26.
NoroKNaruseTLuederR, et al.Application of Zen sitting principles to microscopic surgery seating. Appl Ergon2012; 43: 308–319.
27.
KatoTKoyamaTInoueT. Classification of sitting postures and body pressure distribution and sitting comfort evaluation of office chair. Bulletin of JSSD2015; 61: 1–8. (in Japanese).
28.
BrienzaDMKargPEGeyerMJ, et al.The relationship between pressure ulcer incidence and buttock-seat cushion interface pressure in at-risk elderly wheelchair users. Arch Phys Med Rehabil2001; 82: 529–533.
29.
KapandjiIA. The physiology of the joints 3, The trunk and the vertebral column. 2nd ed. London: Churchill Livingstone, 1974.
30.
WangKChenYHuangS, et al.Subcutaneous fat thickness remarkably influences contact pressure and load distribution of buttock in seated posture. J Healthc Eng2021; 2021: 4496416.
31.
OetteCMüllerRSchreffL, et al.How do everyday life activities affect seating pressure measurements?Int J Spine Surg2023; 17: 698–705.
32.
IzzoRGuarnieriGGuglielmiG, et al.Biomechanics of the spine. Part I: spinal stability. Eur J Radiol2013; 82: 118–126.
33.
VleemingASchuenkeM. Form and force closure of the sacroiliac joints. PM R2019; 11: S24–S31.
