Macroscopic, microscopic, and mesoscopic lumped-parameter models of shape memory alloy wires subjected to axial loads and new flutter prediction methods of a steady and a non-steady aeroelastic system will be presented with some comparison to previous studies.
Bae, J.-S. , Kim, J.-Y. , Lee, I. , Matsuzaki, Y. and Inman, D.J.2005. “Extension of Flutter Prediction Parameter for Multi-Mode Flutter System,”Journal of Aircraft, 42(1): 285–288 .
2.
Batill, S.M. and Carey, D.M.1992. “Digital Time Series for Flutter Test Data,” AIAA Paper 92-2103.
3.
Boyd, J.G. and Lagoudas, D.C.1994. “Thermomechanical Response of Shape Memory Composites,”J. Intel. Mater. and Syst., 5: 333–346 .
4.
Brinson, L.C.1993. “One Dimensional Constitutive Behavior of Shape Memory Alloys: Thermo-mechanical Derivation with Nonconstant Material Functions,”J. Intel. Mater. Syst. & Struct., 4: 229–242 .
5.
Chopra, I. 2001. “Recent Progress on the Development of a Smart Rotor System,” In: Matsuzaki, Y. , et al. (ed.), Proceed. of the 11th International Conference on Adaptive Structures and Technologies, Technomic, Lancaster, pp. 455–500 .
6.
Fung, Y.C.1955. An Introduction to the Theory of Aeroelasticity, John Wiley and Sons, New York .
7.
Jury, I.E.1964. Theory and Application of the z-Transform Method, John Wiley, New York .
8.
Kamita, T. and Matsuzaki, Y. 1996. “Pseudoelastic Theory of Shape Memory Alloys,” In: Proceed. SPIE's 1996 Symposium on Smart Struct. and Mater., Vol. 2717, pp. 509–516 .
9.
Kamita, T. and Matsuzaki, Y.1998. “One-Dimensional Pseudoelastic Theory of Shape Memory Alloys,”Smart Mater. Struct., 7: 489–495 .
10.
Liang, C. and Rogers, C.A.1990. “One-dimensional Thermomechanical Constitutive Relations for Shape Memory Material,”J. Intel. Mater. Syst. & Struct., 1: 207–234 .
11.
Matsuzaki, Y. 2004. “Recent Research on Adaptive Structures and Materials: Shape Memory Alloys and Aeroelastic Stability Prediction,” In: Kim, S.J. , et al. (ed.), Proceed. of the 14th International Conference on Adaptive Structures and Technologies, DEStech Publications, Lancaster, pp. 544–562 .
12.
Matsuzaki, Y. and Ando, Y.1981. “Estimation of Flutter Boundary from Random Responses due to Turbulence at Subcritical Speeds,”Journal of Aircraft, 18(10): 862–868 .
13.
Matsuzaki, Y. and Ando, Y.1984. “Divergence Boundary Prediction from Random Responses,”Journal of Aircraft, 21(6): 435–436 .
14.
Matsuzaki, Y. , Funami, K. and Naito, H. 2002. “Inner Loops Pseudoelastic Hysteresis of Shape Memory Allys: Preisach Approach,” In: Proceed. SPIE's 2002 Symposium on Smart Struct. and Mater., SPIE Paper 4699-49.
15.
Matsuzaki, Y. and Naito, H.2004. “Macroscopic and Microscopic Constitutive Models of Shape Memory Alloys Based on Phase Interaction Energy Function: A Review,”J. Intel. Mater. Syst. & Struct., 15: 141–155 .
16.
Matsuzaki, Y. , Naito, H. , Ikeda, T. and Funami, K.2001. “Thermo-Mechanical Behavior Associated with Pseudoelastic Transformation of Shape Memory Alloys,”Smart Mater. and Struct., 10: 884–892 .
17.
Matsuzaki, Y. and Torii, H.1990. “Response Characteristics of a Two-Dimensional Wing Subject to Turbulence near the Flutter Boundary,”Journal of Sound and Vibration, 136(2): 187–199 .
18.
Naito, H. and Matsuzaki, Y. 2004. “New Mesoscopic Analysis of Pseudoelasticity of an SMA Wire: Disk Elements Model,” In: Breitbach, E. , et al. (ed.), Proceed. the 13th International Conference on Adaptive Structures and Technologies, CRC Press, Boca Raton, pp. 69–75 .
19.
Naito, H. , Matsuzaki, Y. , Funami, K. and Ikeda, T.2001. “Frequency Characteristics of Pseudoelasticity of Shape Memory Alloys,” In: Proceedings of AIAA Adapt. Struct. Forum, AIAA Paper 2001-1355.
20.
Naito, H. , Matsuzaki, Y. and Ikeda, T.2004. “A Unified Constitutive Model of Phase Transformations and Rearrangements of Shape Memory Alloy Wires Subjected to Quasistatic Load,”Smart Materials and Structures, 13: 535–543 .
21.
Naito, H. , Sato, J. , Funami, K. , Matsuzaki, Y. and Ikeda, T.2001. “Analytical Study on Training Effect of Pseudoelastic Transformation of Shape Memory Alloys in Cyclic Loading,”J. Intel. Mater. Syst. & Struct.12: 295–300 .
22.
Ortin, J.1992. “Preisach Modeling of Hysteresis for a Pseudoelastic Cu-ZN-AL Single Crystal,”J. Appl. Phys., 71: 1454–1461 .
23.
Pak, C.G. and Friedman, P.P.1992. “New Time-Domain Technique for Flutter Boundary Identification,” AIAA Paper 92-2102.
24.
Prahlad, H. and Chopra, I.2001. “Comparative Evaluation of Shape Memory Alloy Constitutive Models with Experimental Data,”J. Intel. Mater. Syst. & Struct., 12: 383–395 .
25.
Roy, R.H. , Walker, R.A. and Gilyard, G.B.1986. “Real-Time Flutter Identification with Close Mode Resolution,” AIAA Paper 86-2019.
26.
Shaw, J.A. and Kyriakides, S.1997. “On the Nucleation and Propagation of Phase Transformation Fronts in a NiTi Alloy,”Acta Materialia, 45: 683–700 .
Torii, H. and Matsuzaki, Y.1997. “Flutter Boundary Prediction Based on Nonstationary Data Measurement,”Journal of Aircraft, 34(3): 427–432 .
29.
Torii, H. and Matsuzaki, Y.2001. “Flutter Margin Evaluation for Discrete-Time Systems,”Journal of Aircraft, 38(1): 42–47 .
30.
Torii, H. and Matsuzaki, Y.2002. “Real-Time Flutter Prediction Based on Non-Stationary Flutter Testing,”Trans. Japan Soc. Aeronaut. Space Sciences, 50(576): 30–35 .
31.
Wendler, B.H. 1983. “Near-Real-Time Flutter Boundary Prediction from Turbulence Excited Response,”AIAA/ASME/ASCE/AHS 24th Structures, Structural Dynamics and Materials Conference, AIAA Paper 83-0814.
32.
Zimmerman, N.H. and Weissenburger, J.T.1964. “Prediction of Flutter Onset Speed Based on Flight Testing at Subcritical Speeds,”Journal of Aircraft, 1(4): 190–202 .
