A probabilistic damage diagnostic algorithm based on correlation analysis was investigated to locate single or multiple damage. To highlight the changes in signals corresponding to the presence of damage, digital damage fingerprints (DDFs) were extracted from the captured Lamb wave signals. The algorithm was validated through experimental studies where dual artificially introduced notches in an aluminum plate were successfully located using the constructed images of the probability of the presence of damage. Damage identification using either the captured wave signals or their DDFs agreed well with the actual situations. The concept of virtual sensing paths (VSPs) was proposed to enhance the performance of the algorithm. The results demonstrated that the correlation-based algorithm with the applications of DDFs and VSPs was capable of identifying multiple damage in plate-like structures.
Banerjee, S., Ricci, F., Monaco, E., Lecce, L. and Mal, A.2007. ``Autonomous Impact Damage Monitoring in a Stiffened Composite Panel,'' Journal of Intelligent Material Systems and Structures , 18(6):623-633.
2.
Cohen, J., Cohen, P., West, S.G. and Aiken, L.S.2003. Applied Multiple Regression/Correlation Analysis for the Behavioral Sciences, Lawrence Erlbaum Associates, Mahwah, NJ.
3.
Diamanti, K., Hodgkinson, J.M. and Soutis, C.2004. ``Detection of Low-velocity Impact Damage in Composite Plates Using Lamb Waves,'' Structural Health Monitoring, 3(1):33-41.
4.
Hay, T.R., Royer, R.L., Gao, H., Zhao, X. and Rose, J.L.2006. ``A Comparison of Embedded Sensor Lamb Wave Ultrasonic Tomography Approaches for Material Loss Detection,'' Smart Materials and Structures, 15(4):946-951.
5.
Lemistre, M. and Balageas, D.2001. ``Structural Health Monitoring System Based on Diffracted Lamb Wave Analysis by Multiresolution Processing,'' Smart Materials and Structures, 10(3):504-511.
6.
Li, F., Su, Z., Ye, L. and Meng, G.2006. ``A Correlation Filtering-based Matching Pursuit (CF-MP) for Damage Identification Using Lamb Waves,'' Smart Materials and Structures, 15(6):1585-1594.
7.
Lu, Y., Ye, L. and Su, Z.2006. ``Crack Identification in Aluminium Plates Using Lamb Wave Signals of a PZT Sensor Network,'' Smart Materials and Structures, 15(3):839-849.
8.
Park, H.W., Sohn, H., Law, K.H. and Farrar, C.R.2007. ``Time Reversal Active Sensing for Health Monitoring of a Composite Plate,'' Journal of Sound and Vibration, 302(1-2):50-66.
9.
Qing, X.P., Beard, S.J., Kumar, A. and Hannum, R.2006. ``A Real-time Active Smart Patch System for Monitoring the Integrity of Bonded Repair on an Aircraft Structure,''Smart Materials and Structures, 15(3):N66-N73.
10.
Raghavan, A. and Cesnik, C.E.S.2007. ``Guided-wave Signal Processing Using Chirplet Matching Pursuits and Mode Correlation for Structural Health Monitoring, '' Smart Materials and Structures, 16(2):355-366.
11.
Sohn, H., Farrar, C.R., Hemez, F.M., Shunk, D.D., Stinemates, D.W. and Nadler, B.R. (2003). A Review of Structural Health Monitoring Literature: 1996-2001, Los Alamos National Laboratory Report, LA-13976-MS.
12.
Staszewski, W.J., Lee, B.C. and Traynor, R.2007. ``Fatigue Crack Detection in Metallic Structures with Lamb Waves and 3D Laser Vibrometry,'' Measurement Science and Technology, 18(3):727-739.
13.
Su, Z. and Ye, L.2005. ``A Fast Damage Locating Approach Using Digital Damage Fingerprints Extracted from Lamb Wave Signals,'' Smart Materials and Structures, 14(5):1047-1054.
14.
Su, Z., Wang, X., Chen, Z., Ye, L. and Wang, D.2006. ``A Built-in Active Sensor Network for Health Monitoring of Composite Structures,'' Smart Materials and Structures , 15(6):1939-1949.
15.
Tua, P.S., Quek, S.T. and Wang, Q.2004. ``Detection of Cracks in Plates Using Piezo-actuated Lamb Waves,'' Smart Materials and Structures, 13(4):643-660.
16.
Wang, D., Ye, L., Lu, Y. and Li, F. (2008). Diagnostics of Damage Presence Using Tomographically Constructed Probability Distribution Based on Lamb Wave Signals, In: Fourth European Workshop on Structural Health Monitoring (EWSHM-4) , Kraków, Poland.
17.
Wang, D., Ye, L., Lu, Y. and Su, Z.``Probability of the Presence of Damage Estimated from an Active Sensor Network in a Composite Panel of Multiple Stiffeners,''Composites Science and Technology (In Press).
18.
Wang, L. and Yuan, F.G.2005. ``Damage Identification in a Composite Plate Using Prestack Reverse-time Migration Technique,'' Structural Health Monitoring , 4(3):195-211.
19.
Ye, L., Su, Z., Yang, C., He, Z. and Wang, X.2006. ``Hierarchical Development of Training Database for Artificial Neural Network-based Damage Identification,'' Composite Structures , 76(3):224-233.
20.
Yu, L. and Giurgiutiu, V.2008. ``In Situ 2-D Piezoelectric Wafer Active Sensors Arrays for Guided Wave Damage Detection,''Ultrasonics, 48(2):117-134.
21.
Zhao, X., Gao, H., Zhang, G., Ayhan, B., Yan, F., Kwan, C. and Rose, J.L.2007a. ``Active Health Monitoring of an Aircraft Wing with Embedded Piezoelectric Sensor/ Actuator NetworkI. Defect Detection, Localization and Growth Monitoring,'' Smart Materials and Structures, 16(4):1208-1217.
22.
Zhao, X., Qian, T., Mei, G., Kwan, C., Zane, R., Walsh, C., Paing, T. and Popovic, Z.2007b. ``Active Health Monitoring of an Aircraft Wing with an Embedded Piezoelectric Sensor/Actuator Network: II. Wireless Approaches,'' Smart Materials and Structures, 16(4):1218-1225.
