Sage Journals: Discover world-class research

Abstract

Adaptive structures that allow large deformations under the application of a low and noncontinuous energy input are gaining increasing interest in the aerospace industry. One potential mechanism of realizing shape control is piezoelectric actuation of asymmetric composite laminates. This article presents an optimization study for the design of bistable laminates for a reversible snap-through enabled by two orthogonal piezoelectric layers. The formulation optimizes the load-carrying capability of the structure subject to deflection and actuation limits through a variation in ply orientations and laminate geometry. We find the problem to be multimodal with the multiple optima to be dependent on the loading and snap-through directions and the complex constraint boundary interactions. A reduction in the total actuation voltage is achieved through the simultaneous use of the positive and negative working ranges of the two piezoelectric layers.

Keywords

optimization active composites morphing piezoelectric actuator

Get full access to this article

View all access options for this article.

References

Betts

Kim

Bowen

(2011) Design optimization of stiffness characteristics for bistable composite laminates. 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, AIAA, Denver, CO.

Betts

Salo

AIT

Bowen

Kim

(2010) Characterisation and modelling of the cured shapes of arbitrary layup bistable composite laminates. Composite Structures 92(7): 1694–1700, doi:10.1016/j.compstruct.2009.12.00510.1016/j.compstruct.2009.12.005.

Dang

Tang

(1986) Calculation of the room-temperature shapes of unsymmetric laminates. Proceedings of the International Symposium on Composite Materials and Structures, pp. 201–206. Technomic Publishing, Lancaster, PA.

Dano

M-L

Hyer

(1996) The response of unsymmetric laminates to simple applied forces. Mechanics of Composite Materials & Structures 3(1): 65–80, doi:10.1080/1075941960894585410.1080/10759419608945854.

Dano

M-L

Hyer

(1998) Thermally induced deformation behavior of unsymmetric laminates. International Journal of Solids and Structures 35(17): 2101–2120, doi:10.1016/S0020-7683(97)00167-410.1016/S0020-7683(97)00167-4.

Dano

M-L

Hyer

(2003) SMA-induced snap-through of unsymmetric fiber-reinforced composite laminates. International Journal of Solids and Structures 40(22): 5949–5972, doi:10.1016/S0020-7683(03)00374-310.1016/S0020-7683(03)00374-3.

Giddings

Kim

Salo

AIT

Bowen

(2011) Modelling of piezoelectrically actuated bistable composites. Materials Letters 65(9): 1261–1263, doi:10.1016/j.matlet.2011.01.01510.1016/j.matlet.2011.01.015.

Hooker

Mueller

Kostelecky

Womer

(2007) Fatigue resistant miniature piezoceramic actuators. Journal of Intelligent Material Systems and Structures 18(2): 153–157, doi:10.1177/1045389X0606346010.1177/1045389X06063460.

Hufenbach

Gude

Kroll

(2002) Design of multistable composites for application in adaptive structures. Composites Science and Technology 62(16): 2201–2207, doi:10.1016/S0266-3538(02)00159-810.1016/S0266-3538(02)00159-8.

10.

Jun

Hong

(1990) Effect of residual shear strain on the cured shape of unsymmetric cross-ply laminates. Composite Science and Technology 38(1): 55–67, doi:10.1016/0266-3538(90)90071-C10.1016/0266-3538(90)90071-C.

11.

Kim

Betts

Salo

AIT

Bowen

(2010) Shape memory alloy—Piezoelectric active structures for reversible actuation of bistable composites. AIAA Journal 48(6): 1265–1268, doi:10.2514/1.J05010010.2514/1.J050100.

12.

Pritchard

Bowen

Lowrie

(2001) Multilayer actuators: Review. British Ceramic Transactions 100(6): 265–273, doi:10.1179/09679780168154910.1179/096797801681549.

13.

Ren

(2008) A theoretical study on shape control of arbitrary lay-up laminates using piezoelectric actuators. Composite Structures 83(1): 110–118, doi:10.1016/j.compstruct.2007.10.03010.1016/j.compstruct.2007.10.030.

14.

Schultz

Wilkie

Bryant

(2007) Investigation of self-resetting active multistable laminates. Journal of Aircraft 44(4): 1069–1076, doi:10.2514/1.1740410.2514/1.17404.