Sage Journals: Discover world-class research

Abstract

This article presents an investigation of lead-free solder material 95.5Sn-3.9Ag-0.6Cu under isothermal fatigue loading. The effects of strain rate on hysteresis loop and fatigue life over the total strain range from 0.4 to 1% at room temperature are investigated. A fatigue damage model is established to characterize the isothermal fatigue behavior of the material with the theory of damage mechanics. A fatigue failure criterion is proposed based on the concept of damage accumulation in solder material. The model takes into account the effect of strain rate in the development of constitutive and damage evolution equations. The life prediction is compared with the testing data and has shown a good agreement.

Keywords

damage strain rate isothermal fatigue lead-free solder

Get full access to this article

View all access options for this article.

References

Cutiongco, E.C. , Vaynman, S. , Fine, M.E. and Jeannotte, D.A. (1990). Isothermal Fatigue of 63Sn-37Pb Solder , Journal of Electronic Packaging, 112(2): 110-114 .

Frear, D.R. , Burchett, S.N. , Neilsen, M.K. and Stephens, J.J. (1997). Microstructurally Based Finite Element Simulation of Solder Joint Behaviour , Soldering & Surface Mount Technology, 2(1): 39-42 .

Guo, Q. , Cutiongco, E.C. , Keer, L.M. and Fine, M.E. (1992). Thermomechanical Fatigue Life Prediction of 63Sn/37Pb Solder , Journal of Electronic Packaging, 114(2): 145-151 .

Kanchanomai, C. , Miyashita, Y. , Mutoh, Y. and Mannan, S.L. (2003). Influence of Frequency on Low Cycle Fatigue Behavior of Pb-free Solder 96.5Sn-3.5Ag , Materials Science and Engineering, A345(1-2): 90-98 .

McDowell, D.L. (1992). A Nonlinear Kinematic Hardening Theory for Cyclic Thermoplasticity and Thermoviscoplasticity , International Journal of Plasticity, 8(6): 695-728 .

Neu, R.W. , Scott, D.T. and Woodmansee, M.W. (2000). Measurement and Modeling of Back Stress at Intermediate to High Homologous Temperatures , International Journal of Plasticity, 16(3-4): 283-301 .

Pang, H.L.J. , Xiong, B.S. and Low, T.H. (2004). Low Cycle Fatigue Study of Lead Free 99.3Sn-0.7Cu Solder Alloy , International Journal of Fatigue, 26(8): 865-872 .

Shi, X.Q. , Pang, H.L.J. , Zhou, W. and Wang, Z.P. (1999). A Modified Energy-based Low Cycle Fatigue Model for Entectic Solder Alloy , Scripta Materialia, 41(3): 289-296 .

Wei, Y. and Chow, C.L. (1999). Constitutive Modeling of Material Damage for Fatigue Failure Prediction , International Journal of Damage Mechanics, 8(4): 355-375 .

10.

Wei, Y. and Chow, C.L. (2001). A Damage-coupled TMF Constitutive Model for Solder Alloy , International Journal of Damage Mechanics, 10(2): 133-152 .

11.

Wei, Y. , Chow, C.L. , Neilsen, M.K. and Fang, H.E. (2003). Failure Analysis of Solder Joints with a Damage-coupled Viscoplastic Model , International Journal for Numerical Methods in Engineering, 56(14): 2199-2211 .

12.

Wei, Y. , Chow, C.L. , Neilsen, M.K. and Fang, H.E. (2004). Constitutive Model for Sn-Pb Solder under Fatigue Loading , International Journal of Damage Mechanics, 13(2): 147-161 .

Isothermal Fatigue Damage Model for Lead-free Solder

Abstract

Keywords

Get full access to this article

References