Restricted accessResearch articleFirst published online 2022-8
Bow shape modification through multi-objective hydrodynamic optimization: Methodology comparison between CAD-based FreeForm Deformation and Mesh-based Radial Basis Function approach
Marine industrial engineering face crucial challenges because of environmental footprint of vehicles, global recession, construction, and operation cost. Meanwhile, Shape optimization is the key feature to improve ship efficiency and ascertain better design. Accordingly, the present paper proposes an automated optimization framework for ship hullform modification to reduce total resistance at two cruise and sprint speeds. The case study is a bow shape of a wave-piercing bow trimaran hull. To this end, a multi-objective hydrodynamic problem needs to be solved. A combined optimization strategy using CFD hullform optimization is presented using the software tools STAR-CCM+ and SHERPA algorithm as optimizer. Furthermore, a comparison is made between CAD-based and Mesh-based parametrization techniques. Comparison between geometry regeneration methods is performed to present a practical and efficient parametrization tool. Design variables are control points of FreeForm Deformation (FFD) for CAD-based method and Radial Basis Function (RBF) for Mesh-based method. The optimization results show a 4.77% and 2.47% reduction in the total resistance at cruise and sprint speed, respectively.
JiaJBZongZShiHQ. Model experiments of a trimaran with transom stern. Int Shipbuild Prog2009; 56: 119–133.
2.
DoctorsLJScraceRJ. The optimization of trimaran sidehull position for minimum resistance. In: Proceedings of the 7th international conference on fast sea transportation, FAST2003, Ischia, Italy, 7–10 October 2003, pp.1–12.
3.
NazemianAGhadimiP. Multi-objective optimization of trimaran sidehull arrangement via surrogate-based approach for reducing resistance and improving the seakeeping performance. Proc IMechE, Part M: J Engineering for the Maritime Environment2021; 235: 944–956.
4.
GhadimiPNazemianAGhadimiA. Numerical scrutiny of the influence of side hulls arrangement on the motion of a Trimaran vessel in regular waves through CFD analysis. J Braz Soc Mech Sci Eng2019; 41(1): 1.
5.
HebblewhiteKSahooPKDoctorsLJ. A case study: theoretical and experimental analysis of motion characteristics of a trimaran hull form. Ships Offshore Struct2007; 2: 149–156.
6.
TaharaYPeriDCampanaEF, et al. Computational fluid dynamics-based multi-objective optimization of a surface combatant using a global optimization method. J Mar Sci Technol2008; 13(2): 95–116.
7.
ZhangBJZhangSL.
Research on ship design and optimization based on simulation-based design (SBD) technique. Singapore: Springer, 2018.
8.
PeriDRossettiMCampanaEF. Design optimization of ship hulls via CFD techniques. J Ship Res2001; 45: 140–149.
9.
CampanaEFPeriDTaharaY, et al. Shape optimization in ship hydrodynamics using computational fluid dynamics. Comput Methods Appl Mech Eng2006; 196: 634–651.
10.
TaharaYTohyamaSKatsuiT. CFD-based multi-objective optimization method for ship design. Int J Numer Methods Fluids2006; 52(5): 499–527.
11.
CampanaEFPeriDBulgarelliUP. Optimal shape design of a surface combatant with reduced wave pattern. In: Symposium on “Reduction of military vehicle acquisition time and cost through advanced modelling and virtual simulation,”Paris, France, 22–25 April 2002.
12.
PeriDCampanaEF. High-fidelity models and multi-objective global optimization algorithms in simulation-based design. J Ship Res2005; 49(3): 159–175.
13.
ChenXDiezMKandasamyM, et al. High-fidelity global optimization of shape design by dimensionality reduction, metamodels and deterministic particle swarm. Eng Optim2015; 47(4): 473–494.
14.
FengYChenZDaiY, et al. Multidisciplinary optimization of an offshore aquaculture vessel hull form based on the support vector regression surrogate model. Ocean Eng2018; 166: 145–158.
15.
LuYChangXYinX, et al. Hydrodynamic design study on ship bow and stern hull form synchronous optimization covering whole speeds range. Math Probl Eng2019; 2019: 1–19.
16.
KimHYangC. A new surface modification approach for CFD-based hull form optimization. J Hydrodynam B2010; 22(S1): 503–508.
17.
HuangFYangC. Hull form optimization of a cargo ship for reduced drag. J Hydrodynam B2016; 28(2): 173–183.
18.
ZhangSZhangBTezdoganT, et al. Computational fluid dynamics-based hull form optimization using approximation method. Eng Appl Comput Fluid Mech2018; 12(1): 74–88.
19.
ZongZHongZWangY, et al. Hull form optimization of trimaran using self-blending method. Appl Ocean Res2018; 80: 240–247.
20.
GuoJZhangYChenZ, et al. CFD-based multi-objective optimization of a waterjet-propelled trimaran. Ocean Eng2020; 195: 106755.
21.
PerryEBallingRLandonM. A new morphing method for shape optimization. In: 7th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, 2–4 September 1998, pp.1510–1519.
22.
CoppedèAGaggeroSVernengoG, et al. Hydrodynamic shape optimization by high fidelity CFD solver and Gaussian process based response surface method. Appl Ocean Res2019; 90: 101841.
TaharaYPeriDCampanaEF, et al. Single- and multiobjective design optimization of a fast multihull ship: numerical and experimental results. J Mar Sci Technol2011; 16(4): 412–433.
25.
KaklisPD. Editorial: special issue on: parametric CAD modeling for naval architecture, Ocean & Marine Engineering (NAOME). Ocean Eng2021; 223: 108655.
26.
KhanSKaklisP. From regional sensitivity to intra-sensitivity for parametric analysis of free-form shapes: application to ship design. Adv Eng Inform2021; 49: 101314.
27.
JeongSKimH. Development of an efficient hull form design exploration framework. Math Probl Eng2013; 2013: 8383541.
28.
RaoRV. Jaya: An Advanced Optimization Algorithm and Its Engineering Applications. New York: Springer international publishing, 2018.
29.
AkbariKKhedmatiMRSeifMS. Experimental study on heave and pitch motion characteristics of a wave-piercing trimaran. Trans FAMENA2014; 38(3): 13–26.
30.
GhadimiPNazemianASheikholeslamiM. Numerical simulation of the slamming phenomenon of a wave-piercing trimaran in the presence of irregular waves under various seagoing modes. Proc IMechE, Part M: J Engineering for the Maritime Environment2019; 233: 1198–1211.
31.
ImmonenE. A parametric morphing method for generating structured meshes for marine free surface flow applications with plane symmetry. J Comput Des Eng2019; 6(3): 348–353.
32.
FaulACGoodsellGPowellMJD. A Krylov subspace algorithm for multiquadric interpolation in many dimensions. IMA J Numer Anal2005; 25: 1–24.
33.
GumerovNADuraiswamiR. Fast radial basis function interpolation via preconditioned Krylov iteration. SIAM J Sci Comput2007; 29: 1876–1899.
34.
BeatsonRKPowellMJDTanAM. Fast evaluation of polyharmonic splines in three dimensions. IMA J Numer Anal2006; 27: 427–450.
35.
User Guide. StarCCM+ version 2020.1. SIEMENS Simcenter, Plano, Texas, USA, 2020.
36.
ITTC Recommendations. ITTC-recommended procedures and guidelines, practical guidelines for ship resistance CFD, 7.5-03-02-04. Zürich, Switzerland: ITTC Association,2014.
37.
ITTC Recommendations. ITTC-recommended procedures and guidelines, practical guidelines for ship CFD applications, 7.5-03-02-03. Zürich, Switzerland: ITTC Association, 2011.
38.
NowruziLEnshaeiHLavroffJ, et al. CFD simulation of motion response of a trimaran in regular head waves. Int J Marit Eng2020; 162(A1): 91–106.
39.
GhadimiPKaramiSNazemianA. Numerical simulation of the seakeeping of a military trimaran hull by a novel overset mesh method in regular and irregular waves. Sci Journals Marit Univ Szczecin2021; 65(137): 1–13.
40.
ChoiJYoonSB. Numerical simulations using momentum source wave-maker applied to RANS equation model. Coast Eng2009; 56(10): 1043–1060.
41.
NazemianAGhadimiP. Shape optimisation of trimaran ship hull using CFD-based simulation and adjoint solver. Ships Offshore Struct. Epub ahead of print 2 October 2020. DOI: 10.1080/17445302.2020.1827807.
42.
NazemianAGhadimiP. Automated CFD-based optimization of inverted bow shape of a trimaran ship: proposing an applicable and efficient optimization platform. Sci Iran2020; 28(5): 2751–2768.
43.
RichardsonLF. IX. The approximate arithmetical solution by finite differences of physical problems involving differential equations, with an application to the stresses in a masonry dam. Proc R Soc Lond1911; 210(459–470): 307–357.
44.
ITTC Recommendations. Uncertainty analysis in CFD, uncertainty assessment methodology and procedures. IITTC-Quality. Manual. In: Proceedings of the international towing tank conference, Venice, Italy, 8–14 September 2002.
45.
ITTC Recommendations. Uncertainty analysis in CFD, verification and validation methodology and procedures. ITTC-recommended procedures and guidelines, 7.5-03-01-01. In: Proceedings of the international towing tank conference, Wuxi, China, 18 September 2017.
46.
User Guide. HEEDS MDO version 19.2. SIEMENS Simcenter, Plano, Texas, USA, 2019.
47.
HertelLColladoJSadowskiP, et al. Sherpa: robust hyperparameter optimization for machine learning. SoftwareX2020; 12: 100591.
48.
XuP. A hybrid global optimization method: the multi-dimensional case. J Comput Appl Math2003; 155(2): 423–446.
49.
SeraniA.
Hybrid global/local optimization methods in simulation-based shape design. PhD Thesis, Department of Mechanical and Industrial Engineering, Universita degli studi (Roma Tre University), June2016.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
