Moisture is a crucial factor regarding degradation of building materials, and hygrothermal simulations are essential tools for analysing and predicting moisture content and durability of buildings under dynamic conditions. This article focusses on the development of a Danish moisture reference year, based on climate data from the period 2001 to 2019. The reference year was created as a “one-fits-all” for hygrothermal simulations and to ensure better representation of the Danish climate conditions. Traditionally reference years from nearby locations in Germany and Sweden have been used. The reference year was created according to EN ISO 15927-4:2006; the raw climate data was statistically analysed, and representative months were selected. This process resulted in five reference years, with focus on different types of constructions and exterior claddings. The new reference years were compared with reference years from nearby locations, as well as with the raw Danish climate data over a 9-year period. The analysis includes comparison of the climate parameters, and validation through dynamic simulations in WUFI and DELPHIN. In WUFI, simulations were made for typical wall and roof constructions, whereas DELPHIN simulations were made for three calibrated models from an earlier project, of internally insulated solid masonry walls. The results indicate that the five new Danish reference years were quite similar in many aspects (regardless of the chosen primary and secondary climate parameters) and provided a reliable representation of Danish climate conditions. For the hygrothermal simulations, a good correlation was generally observed between results from simulations using the Danish reference years and simulations based on raw climate data.
Ali MohamedFHensH (1992) Outdoor climate: Reference years. Equivalent temperature for condensation, energy conservation in buildings and community systems, annex 24 heat-air and moisture transfer in insulated envelope parts (HAMTIE). Report T2-B-92/03. Faber Maunsell Ltd.
ASHRAE (2002) ASHRAE Guideline 14-2002 Measurement of Energy and Demand Savings. ASHRAE.
4.
BlockenBCarmelietJ (2004) A review of wind-driven rain research in building science. Journal of Wind Engineering and Industrial Aerodynamics92(13): 1079–1130.
EN/ISO 15927-4 (2006) Hygrothermal performance of buildings-Calculation and presentation of climatic data-Part 4: Hourly data for assessing the annual energy use for heating and cooling.
7.
CoelhoGBASilvaHEHenriquesFMA (2018) Calibrated hygrothermal simulation models for historical buildings. Building and Environment142: 439–450.
CornickSDalglieshWA (2003) A moisture index approach to characterizing climate for moisture management of building envelopes. In: 9th conference on building science technology, Vancouver, British Columbia, Canada, 1 February 2003. Ottawa, ON: NRC Publication, pp. 383–398.
11.
CornickSDjebbarRDalglieshWA (2003) Selecting moisture reference years using a moisture index approach. Building and Environment38(12): 1367–1379.
12.
CrespiARennerKZebischM, et al. (2023) Analysing spatial patterns of climate change: Climate clusters, hotspots and analogues to support climate risk assessment and communication in Germany. Climate Services30: 100373.
13.
DasSSarkarK (2020) Wetting and drying patterns in a wet Moisture Reference Year identified using the Weinert’s index: Station versus gridded data. In: DelgadoJMPQ (ed.) Hygrothermal Behaviour and Building Pathologies. Springer International Publishing, pp. 1–15.
EN/ISO 13788 (2013) Hygrothermal Performance of building Components and Building Elements. Internal Surface Temperature to Avoid Critical Surface Humidity and Interstitial Condensation. Calculation methods, 2 edn.Dansk Standard/Danish Standards.
17.
EN/ISO 15026 (2007) Hygrothermal Performance of Building Components and Building Elements – Assessment of Moisture. Dansk Standard/Danish Standards.
18.
Efficiency Valuation Organization (2012) International Performance Measurement and Verification Protocol Concepts and Options for Determining Energy and Water Savings Volume 1. Available at: https://www.evo-world.org (accessed 25 June 2025).
19.
Feldt JensenNMøllerEBHansenKK, et al. (2022) Risk of mould growth in future climate in different european locations for two bio-based insulation systems for interior retrofitting. In: CESBP 2022: 5th Central European Symposium on Building Physics, 1 ed, Bratislava, Slovakia, September 2022. AIP Conference Proceedings.
GevingS (1997) Moisture design of building constructions: Hygrothermal analysis using simulation models – Part I and II. PhD thesis. Norwegian University of Science and Technology, Trondheim, Norway.
23.
HagentoftEHarderupE (1996) Climatic influences on the building envelope using the Π-Factor. In: Energy conservation in buildings and community systems, annex 24 heat-air and moisture transfer in insulated envelope parts (HAMTIE); Task 2, Paris, France.
JensenNF (2021) Robust solutions for internal retrofitting solid masonry walls in historic buildings with regards to hygrothermal performance. PhD thesis. Technical University of Denmark. Available at: https://orbit.dtu.dk/files/270624466/Phd_thesis_Nickolaj.pdf (accessed 25 June 2022).
26.
JensenNFOdgaardTRBjarløvSP, et al. (2018) Hygrothermal assessment of internally insulated solid masonry walls fitted with exterior hydrophobization and deliberate thermal bridge. In: Ce/papers special issue: ICAAC - 6th international conference on autoclaved aerated concrete, 3–5 September 2018, Potsdam, Germany. Berlin: Ernst & Sohn, A Wiley Brand, pp. 79–87.
27.
JensenNFBjarløvSPOdgaardTR, et al. (2020a) Hygrothermal assessment of diffusion open insulation systems for interior retrofitting of solid masonry walls. Building and Environment182: 107011.
28.
JensenNFBjarløvSPRodeC, et al. (2020b) Hygrothermal assessment of four insulation systems for interior retrofitting of solid masonry walls through calibrated numerical simulations. Building and Environment180: 107031.
29.
JensenNFBjarløvSPRodeC, et al. (2021) Hygrothermal performance of six insulation systems for internal retrofitting solid masonry walls. Journal of Building Physics44(6): 539–573.
JensenNFHansenTKSvaneAM, et al. (2023b) Climate data for moisture simulations: producing a Danish moisture reference year and comparison with previously used reference year locations. Journal of Physics: Conference Series2654: 012029.
KalameesTVinhaJ (2004) Estonian climate analysis for selecting moisture reference years for hygrothermal calculations. Journal of Thermal Envelope and Building Science27(3): 199–220.
34.
KramerRvan SchijndelJSchellenH (2013) Inverse modeling of simplified hygrothermal building models to predict and characterize indoor climates. Building and Environment68: 87–99.
35.
KumaranMKMukhopadhyayaPCornickSM, et al. (2002) A methodology to develop moisture management strategies for wood-frame walls in North America: Application to stucco-clad walls. In: 6th Nordic building physics symposium, Trondheim, Norway, June 2002. Norway: Norwegian University of Science and Technology Trondheim, pp. 651–658.
LibralatoMMuranoGSaroO, et al. (2018) Hygrothermal modelling of building enclosures: Reference year design for moisture ac-cumulation and condensation risk assessment. In: 7th International Building Physics Conference (ed. BeJZhangD), Syracuse, New York, USA, 25 September 2018.
38.
LibralatoMMuranoGDe AngelisA (2019) Generation of moisture reference years for interstitial condensation risk assessment: Influence of the meteorological record length. In: Proceedings of the 16th IBPSA conference, Rome, Italy, September 2019. IBPSA Publications.
39.
LibralatoMMuranoGde AngelisA, et al. (2020) Influence of the meteorological record length on the generation of representative weather files. Energies13(8): 2103.
40.
MaxwellEL (1987) A quasi-physical model for converting hourly global horizontal to direct normal insolation. Technical report no. SERI/TR-215-3087. Solar Energy Research Institute.
41.
MukhopadhyayaPGoudreauPKumaranMK, et al. (2002) Influence of material properties on the hygrothermal response of an ideal stucco wall - Results from hygrothermal simulations. In: 6th Nordic building physics symposium, Trondheim, Norway, June 2002, pp. 611–618.
42.
NicolaiAGrunewaldJZhangJJ (2007) Recent improvements in HAM simulation tools: Delphin 5/CHAMPS-BES. In: Proceedings of 12th symposium of building physics, 29–31 March 2007, Dresden, Germany, 2007, pp. 866–876.
43.
NikVM (2016) Making energy simulation easier for future climate - synthesizing typical and extreme weather data sets out of regional climate models (RCMs). Applied Energy177: 204–226.
44.
NikVM (2017) Application of typical and extreme weather data sets in the hygrothermal simulation of building components for future climate – a case study for a wooden frame wall. Applied Energy177: 204–226.
45.
NouriAFrischJvan TreeckC (2022) Statistical methodologies for verification of building energy performance simulation. In: Building simulation conference proceedings, 2022, pp. 1719–1726. International Building Performance Simulation Association. IBPSA Publications.
46.
OdgaardTBjarløvSPRodeC (2018) Influence of hydrophobation and deliberate thermal bridge on hygrothermal conditions of internally insulated historic solid masonry walls with built-in wood. Energy and Buildings173: 530–546.
47.
PakkalaTA (2023) Climate change effect on freeze-thaw load in Finland. In: Journal of physics: conference series, 13th Nordic symposium on building physics (NSB-2023), Aalborg, Denmark, June 2023. IOP Publishing Ltd. Available at: https://iopscience.iop.org/article/10.1088/1742-6596/2654/1/012020 (accessed 28 January 2024).
48.
PakkalaTALahdensivuJ (2023) Wind-driven rain load in Finland in present and future projected climates. In: Journal of physics: Conference series, 13th Nordic symposium on building physics (NSB-2023), Aalborg, Denmark, June 2023. IOP Publishing Ltd. Available at: https://iopscience.iop.org/article/10.1088/1742-6596/2654/1/012012 (accessed 28 January 2024).
49.
PerezRIneichenPMaxwellE, et al. (1992) Dynamic global-to-direct irradiance conversion models. In: ASHRAE transactions-research series. Atlanta: American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), pp. 354–369.
RodeC (1993) Reference years for moisture calculations, Denmark. Report T2-DK-93/02, IEA Annex 24, HAMTIE. International Energy Agency (IEA).
53.
RuizGRBanderaCF (2017) Validation of calibrated energy models: Common errors. Energies10(10): 1587.
54.
SalonvaaraMSedlbauerKHolmA, et al. (2010) Effect of selected weather year for hygrothermal analyses. In: Proceedings of thermal performance of the exterior envelopes of whole buildings XI, Clearwater Beach, Florida, USA, December 2010. American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.
55.
SchönerTZirkelbachD (2016) Development of hygrothermal reference years for Germany. In: Proceedings of central European symposium on buildings physics (CESBP), 14–16 September 2016, Dresden, Germany. Fraunhofer IRB Verlag, Stuttgart.
56.
Technical University of Denmark (2018) DTU Solar Station: Solar Irradiance and Weather Data. Available at: https://weatherdata.construct.dtu.dk/ (accessed 21 August 2022).
VandemeulebrouckeICaluwaertsSVan Den BosscheN (2022) Decision framework to select moisture reference years for hygrothermal simulations. Building and Environment218: 109080.
60.
VandemeulebrouckeIKotovaLCaluwaertsS, et al. (2023) Freeze-thaw risk in solid masonry: The difference between a climate-based and response-based analysis to study climate change. In: Journal of physics: Conference series, 13th Nordic symposium on building physics (NSB-2023), Aalborg, Denmark, June 2023. IOP Publishing Ltd. Available at: https://iopscience.iop.org/article/10.1088/1742-6596/2654/1/012023 (accessed 4 October 2023).
61.
WangPR (2013) Teknisk Rapport 13-08 Referencevaerdier: Måneds-og årsvaerdier for stationer 2001-2010, Danmark for temperatur, relativ luftfugtighed, vindhastighed, globalstråling og nedbør. Available at: https://www.dmi.dk/dmi/tr13-08 (accessed 13 April 2023).
62.
ZhouXDeromeDCarmelietJ (2016a) A new procedure for selecting moisture reference years for hygrothermal simulations. Bauphysik38(6): 361–365.
63.
ZhouXDeromeDCarmelietJ (2016b) Robust moisture reference year methodology for hygrothermal simulations. Building and Environment110: 23–35.
