The polyvinylidene fluoride cast film was prepared with different melt-draw ratios by a cast extrusion process. The structure and properties of the prepared films were characterized by differential scanning calorimetry, X-ray diffraction, Fourier transform infrared and scanning electrical microscopy. The results showed that with increasing melt-draw ratio, the crystalline orientation increased and the crystalline morphology transformed from spherulites to parallel lamellae perpendicular to the extrusion direction. At the same time, necking behavior in the stress–strain curves disappeared and strain-hardening behavior became apparent. The lamellae thickness distribution became uniform. The polarized Fourier transform infrared results also indicated the existence of some β-phase for the samples with different melt-draw ratios.
KhayetMFengCYKhulbeKC. Preparation and characterization of polyvinylidene fluoride hollow fiber membranes for ultrafiltration. Polymer2002; 43(14): 3879–3890.
2.
OshimaKHEvaws-StrickfadenTTHighsmithAK. The use of a microporous polyvinylidene fluoride (PVDF) membrane filter to separate contaminating viral particles from biologically important proteins. Biologicals1996; 24(2): 137–145.
3.
ZukowskaGRogowskaMWeczkowskaE. Proton conducting polymer gel electrolytes. Solid State Ionics1999; 119(1–4): 289–293.
4.
SeolWHLeeYMParkJK. Preparation and characterization of new microporous stretched membrane for lithium rechargeable battery. J Power Sources2006; 163(1): 247–251.
5.
KongJLiK. Preparation of PVDF hollow-fiber membranes via immersion precipitation. J Appl Polym Sci2001; 81: 1643–1653.
6.
Masakazu T, Hitoshi Y and Iwaki K. Porous polyvinylidene fluoride resin film and process for producing the same. Patent 6299773, USA, 2001.
7.
SadeghiFAjjiACarreauPJ. Analysis of row nucleated lamellar morphology of polypropylene obtained from the cast film process: effect of melt rheology and process conditions. Polym Eng Sci2007; 47(7): 1170–1178.
8.
YuTHWilkesGL. Orientation determination and morphological study of high density polyethylene (HDPE) extruded tubular films: effect of processing variables and molecular weight distribution. Polymer1996; 37(21): 4675–4687.
9.
DuCHXuYYZhuBK. Structure formation and characterization of PVDF hollow fiber membranes by melt-spinning and stretching method. J Appl Polym Sci2007; 106: 1793–1799.
10.
SadeghiFTabatabaeiSHAjjiA. Effect of PVDF characteristics on extruded film morphology and porous membranes feasibility by stretching. J Polym Sci Part B: Polym Phys2009; 47: 1219–1229.
11.
SadeghiFAjjiACarreauPJ. Analysis of microporous membranes obtained from polypropylene films by stretching. J Membr Sci2007; 292(1–2): 62–71.
12.
SadeghiFAjjiACarreauPJ. Study of polypropylene morphology obtained from blown and cast film processes: initial morphology requirement for making porous membrane by stretching. J Plast Film Sheet2005; 21(3): 199–216.
13.
TabatabaeiSHCarreauPJAjjiA. Effect of processing on the crystalline orientation, morphology and mechanical properties of polypropylene cast films and microporous membrane formation. Polymer2009; 50: 4228–4240.
14.
SamonJMSchultzJMHsiaoBS. Structure development during the melt spinning of polyethylene and poly(vinylidene fluoride) fibers by in situ synchrotron small- and wide-angle X-ray scattering techniques. Macromolecules1999; 32: 8121–8132.
15.
SchultzJMHsiaoBSSamonJM. Structural development during the early stages of polymer melt spinning by in-situ synchrotron X-ray techniques. Polymer2000; 41: 8887–8895.
16.
SamonJMSchultzJMHsiaoBS. Structure development in the early stages of crystallization during melt spinning. Polymer2002; 43: 1873–1875.
17.
CakmakMTeitgeAZachmannHG. On-line small-angle and wide-angle X-ray scattering studies on melt-spinning poly(vinylidene fluoride) tape using synchrotron radiation. J Polym Sci Part B: Polym Phys1993; 31: 371–381.
18.
DuCHZhuBKXuYY. Hard elasticity of poly(vinylidene fluoride) fibers. J Mater Sci2005; 40: 1035–1036.
19.
DmitrievIBukosekVLavrentyevV. Structure and deformational behavior of poly(vinylidene fluoride) hard elastic films. Acta Chim Slov2007; 54: 784–791.
20.
VaughanAS. Etching and morphology of poly(vinylidene fluoride). J Mater Sci1993; 28(7): 1805–1813.
21.
DillonDRTennetiKKLiCY. On the structure and morphology of polyvinylidene fluoride-nanoclay nanocomposites. Polymer2006; 47: 1678–1688.
22.
WangYCakmakMWhiteJL. Structure development in melt spinning poly(vinylidene fluoride) fibers and tapes. J Appl Polym Sci1985; 30(6): 2615–2632.
