This paper describes the viscoelastic behaviour of sintered steels with porosities of 12, 20 and 33%, using a dynamic mechanical analyser. Test specimens were prepared from premix powders of 100–150 μm size by a process of die compaction, delubrication and sintering. The influences of test temperature and vibrational frequency on storage and loss modulus and tangent delta have been investigated. The investigated operating temperature and frequency was varied from 25 to 280°C and from 10 to 50 Hz respectively.
HanF.-S., ZhuZ.-G. and LiuC.-S.: Scr. Mater., 1997, 37, (9), 1441–1447.
4.
HanF.-S., ZhuZ.-G. and LiuC.-S.: Acta Phys. Sin. (Chin.), 1988, 47, 372.
5.
WangB., KlepaczkoJ. R., LuG. and KongL. X.: J. Mater. Process. Technot, 2001, 113, (1-3), 574–580.
6.
WangB. and ShuD.: J. Mater. Process. Technot, 2002, 125-126, 144–149.
7.
SchattW. and FriedrichE.: Wissenschaftliche Zeitschrift der Technischen Universitaet Dresden, 1988, 37, (6), 125–133.
8.
Albano-MuellerL.: Powder Metall. Int., 1982, 14, (2), 73–79.
9.
EisenmannM., FischerA., LeismannH. and SickenR.: Mod Develop. Powder Meall., 1988, 21, 637–651.
10.
BuckkremerH. P., StoverD., NeumannP. and ArnholdV.: Proc. World Conference and Exhibition, Paris, France, June 1994, European Powder Metallurgy Association, 107-111.
11.
NeumannP. and ArnholdV.: Filtrieren und Separieren, 1994, 8, (4), 157–162.
12.
NielsenL. F.: J. Am. Ceram. Soc., 1984, 67, (2), 93–98.
13.
PuriP. and CowinS. C.: J. Elasticity, 1985, 15, 167–183.
14.
ZhangJ., GungorM. N. and LaverniaE. J.: J. Mater. Sci., 1993, 28, (6), 1515–1524.
15.
KearnsM. W., BlenkinsopP. A., BarberA. C. and FarthingT. W.: Int. J. Powder Metall., 1988, 24, (1), 59–64.
16.
BanhartJ., BaumeisterJ. and WeberM.: Mater. Sci. Eng. A, 1999, A203, 221–228.
17.
HanF.-S., ZhuZ.-G. and LiuC.-S.: Acust.lActa Acust., 1998, 84, 573.
18.
DaviesG. J. and ZhenS.: J. Mater. Set, 1983, 18, (7), 1899–1911.
19.
KimK. T. and SuhJ.: Int. J. Eng. Set, 1989, 27, (7), 767–768.
20.
AkisanyaR.: Int. J. Impact Eng., 1997, 19, 531.
21.
da SilvaM. G. and RameshK. T.: Int. J. Plasticity, 1997, 13, (6-7), 587–610.
