Keyhole gas tungsten arc welding (K-GTAW), a novel variant of GTAW, has been used to join commercially pure zirconium. The process enables single pass welding of 6˙35 mm thick zirconium using conventional GTAW equipment and a high current torch, without expensive filler metal addition or joint preparation. The mechanical properties and the microstructure of the resulting joints were characterised. It is concluded that the K-GTAW process, with its high productivity combined with low capital investment requirements, can be successfully used for welding relatively heavy section zirconium.
LathabaiS., JarvisB. L. and BartonK. J.: Mater. Sci. Eng. A, 2001, A299, 81–93.
10.
LathabaiS., JarvisB. L. and BartonK. J.: Proc. Corros. Appl. Conf., Couer d'Alene, ID, USA, September 2003, Allegheny Technologies, Paper 11.
11.
LathabaiS., BartonK. J., GreenL. K. and TyagiV. K.: Proc. 7th Int. Conf. on ‘Trends in welding research’, Pine Mountain, Georgia, USA, May 2005, ASM International, 711–716.
12.
ManK. F.: Int. J. Thermophys., 2000, 21, 793–804.
13.
AhmedN. U., JohnsonR. C. and GordonT. W.: US patent no. US5892199, 6 April 1999.
14.
FujiH., MasakiM., SakunoF. and TakedaY.: Proc. 10th World Cong. on ‘Titanium’, Hamburg, Germany, July 2003, Wiley-VCH, 699–705.
15.
WangS. H., WeiM. D. and TsayL. W.: Mater. Lett., 2003, 57, 1815–1823.
16.
‘ASME boiler and pressure vessel code’, section IX, ‘Qualification standard for welding and brazing procedures, welders, brazers, and welding and brazing operators’, ASME Boiler and Pressure Vessel Committee, Subcommittee on Welding, The American Society for Mechanical Engineers, New York, USA, 2001.
17.
‘ASME boiler and pressure vessel code’, section V, ‘Nondestructive Examination’, The American Society for Mechanical Engineers, New York, USA, 2000.
