Sage Journals: Discover world-class research

Abstract

Manipulators with fewer than six degrees of freedom meet specific tasks and have the advantage of reducing structural complexity, design redundancy and cost. In order to construct parallel manipulators for given tasks, this paper develops an algebraic approach to type synthesis of spatial parallel mechanisms with fewer than six degrees of freedom based on the screw theory. With the proposed steps (i.e. describing restraining screws, identifying basic kinematic pair (KP) screws reciprocal to the restraining screws, linearly transforming the basic KP screws to obtain equivalent serial limbs and allocating the serial limbs) new parallel mechanisms can be constructed. The approach converts a mechanism design into a screw algebra operation, in which screws describe kinematic pairs and constraints between links. As examples, synthesis procedures of parallel mechanisms with four degrees of freedom are given, from which five novel parallel mechanisms result.

Keywords

parallel manipulator mechanism synthesis screw theory degree of freedom mobility

Get full access to this article

View all access options for this article.

References

Hunt

K. H.

Structural kinematics of in-parallel-actuated robot arms. Trans. ASME, J. Mechanisms Trans. and Automn in Des., 1983, 105, 705–712.

Lee

K. M.

Shah

D. K.

Kinematic analysis of three-degree-of-freedom in-parallel actuated manipulators. In Proceedings of IEEE International Conference on Robotics and Automation, 1987, Vol. 1, pp. 345–350.

Waldron

K. J.

Raghavan

Roth

Kinematics of a hybrid series-parallel manipulation system. Trans. ASME, J. Mechanisms, Trans. and Automn in Des., 1989, 111, 211–221.

Lee

K. M.

Arjuman

A 3-DOF micromotion in-parallel actuated manipulator. IEEE Trans. Robotic Automn, 1991, 7 (5), 634–640.

Clavel

Delta, a fast robot with parallel geometry. In Proceedings of the International Symposium on Industrial Robots, Switzerland, 1988, pp. 91–100.

Pierrot

Dauchez

Fournier

Fast parallel robots. J. Robotic Systems, 1991, 8 (6), 829–840.

Tsai

L. W.

Stamper

R. E.

A parallel mechanism with only translational degree of freedom. In Proceedings of ASME 1996 Design Engineering Technical Conferences and Computers in Engineering Conference, 1996, paper 96-DETC/MECH-1152.

Tsai

L. W.

Multi-degree-of-freedom mechanisms for machine tools and the like. US Pat. 5656905, 1997.

Huang

Fang

Y. F.

Kinematic characteristics analysis of 3-DOF in-parallel actuated pyramid mechanisms. Mech. Mach. Theory, 1996, 31 (8), 1009–1018.

10.

Huang

Fang

Y. F.

Kong

L. F.

Theory and Control of Parallel Robotic Mechanisms, 1997 (Publisher of Mechanical Engineering, Beijing, PR China).

11.

Dai

J. S.

Holland

Kerr

D. R.

Task-oriented direct synthesis of serial manipulator using moment invariants. In 24th ASME Biennial Mechanisms Conference, Irvine, California, 1996, paper DETC96/MECH-1004, pp. 19–22 (American Society of Mechanical Engineers, New York).

12.

Gosselin

C. M.

Hamel

J. F.

The agile eye: A high-performance 3-DOF camera-orienting device. In Proceedings of the IEEE International Conference on Robotics and Automation, 1994, Vol. 3, pp. 781–786.

13.

Gosselin

C. M.

Eric

St-P.

Development and experimentation of a fast 3-DOF camera-orienting device. Int. J. Robotics Res., 1997, 16 (5), 619–630.

14.

Wang

Gosselin

C. M.

Kinematic analysis of singularity loci of spatial four-degree-of-freedom parallel manipulators using a vector formulation. Trans. ASME, J. Mech. Des., 1998, 120, 555–558.

15.

Tsai

L. W.

The enumeration of a class of three-DOF parallel manipulators. In Proceedings of the 10th World Congress on The Theory of Machine and Mechanisms, Oulu, Finland, 1999, pp. 1121–1126.

16.

Carretero

J. A.

Podhorodeski

R. P.

Gosselin

C. M.

Kinematic analysis and optimization of a new three degree-of freedom spatial parallel manipulator. Trans. ASME, J. Mech. Des., 2000, 112, 17–24.

17.

Dai

J. S.

Jones

Rees J.

Interrelationship between screw systems and their reciprocal system and applications. Mech. Mach. Theory, 2001, 36 (5), 633–651.

18.

Zhao

T. S.

Huang

A novel three-DOF translational platform mechanism and its kinematics. In Proceedings of ASME 2000 International Design Engineering Technical Conferences, Baltimore, Maryland, 10–13 September 2000, paper DETC2000/MECH-14101.

19.

Hunt

K. H.

Kinematic Geometry of Mechanism, 1978 (Oxford University Press).

20.

Waldron

K. J.

A family of over-constrained linkages. J. Mechanics, 1967, 2, 201–211.

21.

Dimenberg

F. M.

The Screw Calculus and Its Applications in Mechanics (in Russian), 1965 (Izad, Nauka, Moscow); English translated by Foreign Technology Division, WP-APB, Ohio, 1968.

22.

Murray

R. M.

Sastry

Shankar S.

A Mathematical Introduction to Robotic Manipulator, 1993 (CRC Press, Boca Raton, Florida).

23.

Ball

R. S.

A Treatise on the Theory of Screws, 1900 (Cambridge University Press).