This work proposes a simple technique for inverse dynamics control of parallel mani-pulators in a joint space. In this technique, there is no need for forward kinematics, which is exacerbated by no closed-form solution for many parallel manipulators. A set of simulations is introduced to signify the validity of the proposed control technique compared with full joint feedback control.
HuangT.LiM.ZhaoX. M.MeiJ. P.ChetwyndD. G.HuS. J., ‘Conceptual design and dimensional synthesis for a 3-DOF module of the trivariant: A novel 5-DOF reconfigurable hybrid robot robotics and automation’IEEE Trans. Robot.213 (2005): 449–456.
2.
RenL.MillsJ. K.SunD., ‘Controller design applied to planar parallel planar manipulators for trajectory tracking control’. In Proceedings of the 2005 IEEE International Conference on Robotics and automation, Barcelona, Spain, 18–22 April 2005, pp. 968–973.
3.
KozakK.Ebert-UphoffI.SinghoseW., ‘Locally linearized dynamic analysis of parallel planar manipulators and application of input shaping to reduce vibrations’ASME J. Mech. Des.1261 (2004): 156–168.
4.
OctomoD.LiawH. C.AliciG.ShirinzadehB., ‘Direct kinematics and analytical solution to 3RRR parallel planar mechanisms’. In Proceedings of the Ninth IEEE International Conference on Control, automation, robotics and vision, Singapore, 5–8 December 2006, pp. 1–6.
5.
GoughV. E., ‘Contribution to discussion of papers on research in automobile stability, control and tire performance’Proc. Automob. Div. Instn Mech. Engrs57 (1956): 392–397.
6.
ClavelR., ‘Delta, a fast robot with parallel geometry’. In Proceedings of the 18th International Symposium on Industrial robots (ISIR), Lausanne, Switzerland, 26–28 April 1988, pp. 91–100 (IFS Publications, London).
7.
LiY.XuQ., ‘Dynamic analysis of a modified DELTA parallel robot for cardiopulmonary resuscitation intelligent robots and systems’. In Proceedings of the 2005 IEEE/RSJ International Conference, Edmonton, Canada, 2–6 August 2005, pp. 233–238.
8.
BruzzoneL. E.MolfinoR. M.ZoppiM., ‘Modeling and control of peg-in-hole assembly performed by a translational robot’. In Proceedings of the IASTED International Conference on Modeling, identification and control (MIC 2001), Innsbruck, Austria, 18–21 February 2001, pp. 711–713.
9.
ZhangY.CongS.ShangW.LiZ.JiangS., ‘Modeling, identification and control of a redundant planar 2-DOF parallel manipulator international journal of control’Autom. Syst.55 (2007): 559–569.
10.
ChengH.YiuY.LiZ., ‘Dynamics and control of redundantly actuated parallel manipulators’IEEE/ASME Trans. Mechatronics84 (2003): 483–491.
11.
OmranA.El-BayoumiG.BayoumiM.KassemA., ‘Genetic algorithm-based optimal control for a 6-DOF non redundant stewart manipulator’Int. J. Mech. Syst. Sci. Eng.22 (2008): 73–79.
12.
OmranA.KassemA.El-BayoumiG.BayoumiM., ‘Mission-based optimal control of stewart manipulator’Aircr. Eng. Aerosp. Technol. J.813 (2009): 226–233.
13.
OmranA.BayoumiM.KassemA.El-BayoumiG., ‘Optimal forward kinematics modeling of a stewart manipulator using genetic algorithms Jordan’J. Mech. Ind. Eng.34 (2009): 241–251.
14.
DietmaierP., ‘The Stewart—Gough platform of general geometry can have 40 real postures’. In Proceedings of the ARK, Strobl, Austria, June 1998, pp. 7–16.
15.
KhanW. A.KroviV. N.SahaS. K.AngelesJ., ‘Recursive kinematics and inverse dynamics for a planar 3R parallel manipulator journal of dynamic systems’Meas. Control127 (2005): 529.
16.
TsaiL. W., ‘Solving the inverse dynamics of parallel manipulators by the principle of virtual work’J. Mech. Des.12212000: 3.
17.
KhalilW.DombreE., Modeling, identification and control of robots (London: Taylor and Francis2002).
18.
FeatherstoneR.OrinD., ‘Robot dynamics: Equations and algorithms’. In Proceedings of the IEEE International Conference of Robotics and Automation, San Francisco, CA, USA, 24–28 April 2000, vol. 1, pp. 826–834.
19.
MurakamiT.YuF.OhnishiK., ‘Torque sensorless control in multi-degree-of-freedom manipulator’IEEE Trans. Ind. Electron.402 (1993): 259–265.
20.
KatsuraS.SuzukiJ.OhnishiK., ‘Pushing operation by flexible manipulator taking environmental information into account’IEEE Trans. Ind. Electron.535 (2006): 1688–1697.
