Biomaterials do not escape from the general trend present in all contemporary science and technology towards increasing use of computers and information technology. In this paper the use of computer modelling for the design of biomaterials is discussed. The word 'biomaterials' is interpreted in its broadest sense, i.e. referring to any foreign object brought into the body for temporary or permanent use. Computer modelling will first be discussed as a tool to model biological structures (bones, arteries) or to investigate and simulate biological interactions at implant-host interfaces. It will then be illustrated how computer modelling, using insights gained from the modelling of the biological structures themselves, is used in the design process of dental, orthopaedic and cardiovascular prostheses.
The area of computer modelling for biomaterials applications has become so vast that an exhaustive overview is impossible in the framework of one paper. Rather, some illustrative case studies will be discussed which are, in the opinion of the authors, representative of general trends in this challenging domain of science on the boundary between engineering and medicine.
NAFEMS (National Agency for Finite Element Methods and Standards) A Finite Element Primer, 1986, Department of Trade and Industry, Glasgow, Scotland.
2.
RybickiE. F.SimonenF. A.WeisE. B.On the mathematical analysis of stress in the human femur. J. Biomechanics, 1972, 5, 203–215.
3.
RohimannA.MössnerU.BergmannG.KölbelR.Finite element analysis and experimental investigation in a femur with hip endoprosthesis. J. Biomechanics, 1983, 16, 727–742.
4.
SvenssonN. L.ValliappanS.WoodR. D.Stress analysis of human femurs with implanted Charnley prosthesis. J. Biomechanics, 1977, 10, 581–588.
HuiskesR.Some fundamental aspects of human joint replacements. PhD thesis, Technical University of Eindhoven, The Netherlands, 1979.
7.
ChandR.HaugE.RimK.Stresses in the human knee joint. J. Biomechanics, 1976, 9, 417–422.
8.
RöhrleH.ScholtenR.SollbachW.RitterG.GrünertA.Analysis of stress distributions in natural and artificial knee joints on the femur side using the finite element method. In Proceedings of the International Conference onFinite Elements in Biomechanics, Tucson, Arizona, 1980.
9.
HobathoM. C.DarmanaR.PastorP.BarrauJ. J.LarozeS.MorucciJ. P.Development of a three dimensional finite element of a human tibia using experimental modal analysis. J. Biomechanics, 1991, 24, 371–383.
10.
HartT. R.HennebelV. V.ThongpredaN.Van BuskirkW. C.AndersonR. C.Three dimensional finite element study of the biomechanics of the mandible. J. Biomechanics, 1992, 25, 261–286.
11.
EstivalèzesE.HobathoM. C.LimbertG.CouteauB.DarmanaR.Determination of individualised and homogenised characteristics of normal human tibiaein vivo. In Proceedings of the Third International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Barcelona, Spain, 1997.
12.
ViccontiM.CappelloA.MassariB.BertozziA.ZannoniC.Optimal slice positioning for long bone CT reconstruction. In Proceedings of the IEEE/EMBS Conference, Amsterdam, The Netherlands, 1996, paper number 3.1.5–2.
13.
HansenT. M.KoenemanJ. B.The use of structural partitioning within ANSYS to solve non-linearities within human hip replacement models. In Proceedings of the 1987 ANSYS Conference, Newport Beach, California, 1987.
14.
WeinansH.HuiskesR.GrootenboerH.Quantitative analysis of bone reactions to relative motions at implant-bone interfaces. J. Biomechanics, 1993, 26, 1271–1281.
15.
TaylorM.TannerK. E.FreemanM. A.R.YettramA. L.Finite element modelling - predictor of implant survival?J. Mater. Sci.: Mater. Med., 1995, 6, 808–812.
16.
PrendergastP. J.HuiskesR.SoballeK.Biophysical stimuli on cells during tissue differentiation at implant interfaces. J. Biomechanics, 1997, 30 (6), 539–548.
17.
VerdonschotN.HuiskesR.Subsidence of THA stems due to acrylic cement creep is extremely sensitive to interface friction. J. Biomechanics, 1996, 29, 1569–1576.
18.
HuiskesR.Bone remodelling around implants can be explained as an effect of mechanical adaptation. In Total Hip Revision Surgery (Eds GalanteJ. O.RosenbergA. G.CallaghanJ. O.), 1995, (Raven Press, New York).
19.
HalesS.Statical Essays: Containing Haemastatics, Vol. 2, 1981, pp. 1733, Pfizer Laboratories (Innys and Manby, London).
20.
FrankO.Die Grundform des arteriellen. Pulses. Z. Biol., 1899, 37, 483.
21.
McDonaldD. A.Blood Flow in Arteries, 2nd edition, 1974, (Williams and Wilkins, Baltimore).
22.
MilnorW. R.Hemodynamics, 2nd edition, 1989, (Williams and Wilkins, Baltimore).
23.
NoordergraafA.Circulatory System Dynamics, 1978 (Academic Press, New York).
24.
WesterhofN.ElzingaG.SipkemaP.An artificial arterial system for pumping hearts. J. Appl. Physiol., 1971, 31, 776–781.
25.
WolffJ.Das Gesetz der Transformation der Knochen, 1892 (Kirchwald, Berlin).
26.
CowinS. C.HartR. T.BalserJ. R.KohnD. H.Functional adaptation in long bones: Establishing in vivo values for surface remodelling rate coefficients. J. Biomechanics, 1985, 18, 665–684.
27.
CowinS. C.Wolff's Law of trabecular architecture at remodelling equilibrium. J. Biomech. Engng, 1986, 108, 83–88.
28.
HuiskesR.WeinansH.GrootenboerH. J.DalstraM.FudalaB.SlooffT. J.Adaptive bone-remodeling theory applied to prosthetic-design analysis. J. Biomechanics, 1987, 20, 1135–1150.
29.
WeinansH.HuiskesR.van RietbergenB.SumnerD. R.TurnerT. M.GalanteJ. O.Adaptive bone remodeling around bonded noncemented THA: A comparison between animal experiments and computer simulations. J. Orthop. Res., 1993, 11, 500–513.
PrendergastP. J.TaylorD.Prediction of bone adaptation using damage accumulation. J. Biomechanics, 1994, 27, 1067–1076.
32.
Vander SlotenJ.Van der PerreG.Trabecular structure compared to stress trajectories in the proximal femur and the calcaneus. J. Biomed. Engng, 1989, 11, 203–206.
33.
LittleR. B.WeversH. W.SiuD.CookeT. D. V.A three dimensional finite element analysis of the upper tibia. J. Biomech. Engng, 1986, 108, 111–119.
34.
HayesW. C.SnyderB.LevineB. M.RamaswamyS.Stress-morphology relationships in trabecular bone of the patella. In Finite Elements in Biomechanics (Eds GallagharSimonJohnsonGron), 1982, pp. 223–268 (John Wiley, New York).
35.
HollisterS.Analysis, design and manufacture of bone microstructure. In Proceedings of the Third International Symposium onComputer Methods in Biomechanics and Biomedical Engineering, Barcelona, Spain, 1997.
36.
Van RietbergenB.WeinansH.HuiskesR.OdgaardA.A new method to determine trabecular bone elastic properties and loading using micromechanical finite element models. J. Biomechanics, 1995, 28, 69–81.
37.
Van RietbergenB.OdgaardA.KabelJ.HuiskesR.Direct mechanics assessment of elastic symmetries and properties of trabecular bone architecture. J. Biomechanics, 1996, 29, 1653–1657.
38.
MüllerR.HildebrandT.RüegseggerP.Non-invasive bone biopsy: A new method to analyse and display the three-dimensional structure of trabecular bone. Phys. Med. Biol., 1994, 39, 145–164.
39.
MüllerR.KollerB.HildebrandT.LaibA.GlanoliniS.RüegseggerP.Resolution dependency of microstructural properties of cancellous bone based on three-dimensional microtomography. Technol. Health Care, 1996, 4(1), 113–120.
40.
El HajA. J.MinterS. L.RawlinsonS. C.SuswilloR.LanyonL. E.Cellular responses to mechanical loading in vitro. J. Bone Miner. Res., 1990, 5, 923–932.
41.
MullenderM. G.HuiskesR.WeinansH.A physiological approach to the simulation of bone remodeling as a self-organizational control process. J. Biomechanics, 1994, 27, 1389–1394.
42.
MullenderM. G.HuiskesR.The suitability of osteocytes and bone lining cells as candidates for the role mechano-sensors in bone. In Proceedings of the 10th Conference of the ESB, Leuven, Belgium, 1996, pp. 323.
43.
CarterD. R.van der MeulenM. C.H.BeaupréG. S.Mechanical factors in bone growth and development. Bone, 1996, 18 (1) Suppl., 5S-10S.
KovacsS.BarzilaiB.PerezJ.Evaluation of diastolic function with Doppler echocardiography: The PDF formalism. Am. J. Physiol., 1987, 252 (Heart Circ. Physiol., 21), 178–187.
46.
ThomasJ. D.NewellJ. B.ChoongC. Y.P.WeymanA. E.Physical and physiological determinants of transmitral velocity: Numerical analysis. Am. J. Physiol., 1991, 260 (Heart Circ. Physiol., 29), 1718–1730.
47.
StergiopulosN.MeisterJ. J.WesterhofN.Determinants of stroke volume and systolic and diastolic aortic pressure. Am. J. Physiol., 1996, 32, 2050–2059.
48.
SugaH.SagawaK.ShoukasA. A.Load independence of the instantaneous pressure-volume ratio of the canine left ventricle and effects of epinephrine and heart rate on the ratio. Circ. Res., 1973, 32 (3), 314–322.
49.
LefevreJ.A didactic presentation of elementary bond graphs for non-engineering students. J. Franklin. Inst., 1991, 328, 549–563.
50.
PerktoldK.ReschM.FlorianH.Pulsatile non-Newtonian flow characteristics in a three-dimensional human carotid bifurcation model. J. Biomech. Engng, 1991, 113, 464–475.
51.
YamaguchiT.NakanoA.HanaiS.Three dimensional shear stress distribution around small atherosclerotic plagues with steady and unsteady flow. In Biomechanical Transport Process (Eds MosoraF.CaroC. G.KrauseF.Schmid-SchönbeinH.BaqueyC.PelissierR.), 1990, pp. 173–182 (Plenum Press, New York).
52.
BotnarR.ScheideggerM. B.BoesigerP.Quantification of blood flow patterns in human vessels by magnetic resonance imaging. Technol. Health Care, 1996, 4, 97–112.
53.
VerdonckP.KlevenA.VerhoevenR.AngelsenB.VandenbogaerdeJ.A computer controlled in vitro model of the human left heart. J. Med. Biol. Engng Comput., 1992, 30, 656–659.
54.
LiepschD.MoravecSt.BaumgartR.Some flow visualization and laser Doppler velocity measurements in a true-to-scale elastic model of a human aortic arch—a new model technique. Biorheol., 1992, 29, 563–580.
55.
NaertI.QuirijnenM.A study of 589 consecutive implants supporting complete fixed prostheses. Part II: Prosthetic aspects. J. Prosthetic Dent., 1992, 68, 949–956.
56.
ErikssonR.AlbrektssonT.Temperature threshold levels for heat-induced bone tissue injury: A vital-microscopy study in the rabbit. J. Prosthetic Dent., 1983, 50, 101–107.
57.
PattersonE. A.JohnsR. B.Theoretical analysis of the fatigue life of fixture screws in osseointegrated dental implants. Int. J. Oral Maxillofacial Implants, 1992, 7, 26–30.
58.
SaadounA.Le GallM.Compilation of clinical results and guidelines on Steri-Oss endosseous implants. Int. J. Periodont. Restorative Dent., 1992, 1, 486–489.
59.
JacobsR.van SteenbergheD.Comparative evaluation of oral tactile function by means of teeth or implant support prostheses. Clin. Oral Implants Res., 1991, 2, 75–80.
60.
HübschP. F.MiddletonJ.ReesJ. S.JacobsenP. H.An adaptive approach for the analysis of dental restorations. J. Biomed. Engng, 1993, 15, 401–408.
61.
SiegeleD.SoltészU.Numerical investigations of the influence of implant shape on stress distributions in the jawbone. Int. J. Oral Maxillofacial Implants, 1989, 4, 333–340.
62.
Van OosterwyckH.Van BrusselK.Van der PerreG.Vander SlotenJ.De CoomanS.LievensS.PuersR.DuyckJ.NaertI.Bone loading around screw-shaped and cylindrical oral implants. In Proceedings of the 10th Conference of the ESB, Leuven, Belgium, 1996, pp. 38.
63.
BarbierL.SchepersE.Adaptive bone remodelling around oral implants under axial and nonaxial loading conditions in the dog mandible. Int. J. Oral Maxillofacial Implants, 1997, 12, 215–224.
64.
BarbierL.SchepersE.Vander SlotenJ.Van der PerreG.Adaptive bone remodelling around loaded oral implants analysed in an animal model and finite element model. In Proceedings of the 10th Conference of the ESB, Leuven, Belgium, 1996, pp. 325.
65.
VerstrekenK.Van CleynenbreugelJ.MarchalG.van SteenbergheD.SuetensP.Computer-assisted planning of oral implant surgery—an approach using virtual reality. In Proceedings of Conference onMedicine Meets Virtual Reality IV, San Diego, California, 1996, pp. 423–434.
66.
FriedmanR. J.BlackJ.GalanteJ. O.JacobsJ. J.SkinnerH. B.Current concepts in orthopaedic biomaterials and implant fixation. J. Bone Jt Surg., 1993, 75-A (7), 1086–1109.
67.
LewisJ. L.AskewM. J.WixsonR. L.KramerG. M.TarrR. R.The influence of prosthetic stem stiffness and of a calcar collar on stresses in the proximal end of the femur with a cemented femoral component. J. Bone Jt Surg., 1984, 66A, 280–286.
68.
KeavenyT. M.BartelD. L.Effects of porous coating and collar support on early load transfer for a cementless hip prosthesis. J. Biomechanics, 1993, 26, 1205–1216.
69.
KeavenyT. M.BartelD. L.Effects of porous coating, with and without collar support, on early relative motion for a cementless hip prosthesis. J. Biomechanics, 1993, 26, 1355–1368.
70.
Vander SlotenJ.LabeyL.Van AudekerckeR.HelsenJ.Van der PerreG.The development of a physiological hip prosthesis: The influence of design and materials. J. Mater. Sci.: Mater. Med., 1993, 4, 407–414.
71.
UnsworthA.StrozziA.Axisymmetric finite element analysis of hip replacements possessing an elastomeric layer: The effects of clearance and Poisson's ratio. Proc. Instn Mech. Engrs, Part H, Journal of Engineering in Medicine, 1995, 209 (H1), 59–64.
72.
HuiskesR.BoeklagenR.Mathematical shape optimization of hip prosthesis design. J. Biomechanics, 1989, 22, 793–804.
73.
VerdonschotN.HuiskesR.The effects of cement-stem debonding in THA on the long-term failure probability of cement. J. Biomechanics, 1997, 30, 795–802.
BechtoldJ. E.Application of computer graphics in the design of custom orthopaedic implants. Orthop. Clin. N. Am., 1986, 17, 605–612.
76.
CouteauB.LabeyL.HobathoM. C.Vander SlotenJ.ArlaudJ. Y.BrignolaJ. C.Validation of a three-dimensional finite element model of a human femur with a customized hip implant. In Proceedings of the Third International Symposium onComputer Methods in Biomechanics and Biomedical Engineering, Barcelona, Spain, 1997.
77.
WalkerP. S.SchneeweisD.MurphyS.NelsonP.Strains and micromotions of press-fit femoral stem prostheses. J. Biomechanics, 1987, 20 (7), 693–702.
78.
MulierJ. C.MulierM.BradyL. P.SteenhoudtH.CauweY.GoossensM.ElloyM.A new system to produce intraoperatively custom femoral prosthesis from measurements taken during the surgical procedure. Clin. Orthop. Rel. Res., 1989, 249, 97–112.
79.
LabeyL.Vander SlotenJ.Van AudekerckeR.Van der PerreG.Development of an experimental setup for assessment of relative movement of hip prosthesesin vitro. In Proceedings of the 14th Annual Conference of the IEEE Engineering in Medicine and Biology Society, Paris, 29 October-1 November 1992, pp. 29–30.
80.
SkalliW.RobinS.LavasteF.DuboussetJ.A biomechanical analysis of short segment spinal fixation using a three-dimensional geometric and mechanical model. Spine, 1993, 18 (5), 536–545.
81.
Van BrusselK.Vander SlotenJ.Van AudekerckeR.SwaelensB.RichardF.AssakerR.KulikJ. F.Medical image-based design of an individualised surgical guide for pedicle screw insertion. In IEEE/EMBS Conference, Amsterdam, The Netherlands, 31 October-2 November 1996, 870 (on CD ROM).
82.
RadermacherK.StaudteH.-W.RauG.Computer assisted orthopedic surgery by means of individual templates: Aspects and analysis of potential applications. In Proceedings of the First International Symposium onMedical Robotics and Computer Assisted Surgery, Pittsburg, Pennsylvania, 1994, pp. 42–48.
VerdonckP.VerhoevenR.RieuR.PelissierR.Cardiovascular fluid dynamics: Principles, clinical applications (I) and advanced modelling (II). In EC Comett Course Book, 1994 (University of Ghent).
85.
SteinmanD.EthierC.The effect of wall distensibility on flow in a two-dimensional end-to-side anastomosis. J. Biomech. Engng, 1994, 116, 294–301.
86.
GraichenF.BergmannG.Patient monitoring system for load measurements with spinal fixation devices. Med. Engng Phys., 1996, 18, 167–174.
87.
PuersR.Linking sensors with telemetry: Impact on the system design. Sensors and Actuators, 1996, A56, 169–174.
88.
HuiskesR.HollisterS. J.From structure to process, from organ to cell: Recent developments of FE-analysis in orthopaedic biomechanics. J. Biomech. Engng, 1993, 115, 520–527.
