Three mixed lubrication models of a reciprocating hydraulic rod seal are described: a steady-state elastic model, a transient elastic model, and a transient viscoelastic model. These models are used to simulate a U-cup rod seal utilized in an injection moulding application. Results characterizing the leakage and friction force, as well as the detailed behaviour of the sealing zone, are presented.
IshiwataH.KambayashiH.‘A study of oil seal for reciprocating motion’In Proceedings of the 2nd BHRA International Conferenceon Fluid sealing, Cranfield, UK, 1964, paper B3, pp. 29–39.
2.
O'DonogueJ. P.LawrieJ. M.‘The mechanism of lubrication in a reciprocating seal’In Proceedings of the 2nd BHRA International Conference on Fluid sealing, Cranfield, UK, 1964, paper B6, pp. 69–80.
3.
FieldG. J.NauB. S.‘A theoretical study of the elastohydrodynamic lubrication of reciprocating rubber seals’ASLE Trans.18 (1974): 48–54
4.
RuskellL. E. C.‘A rapidly converging theoretical solution to the elastohydrodynamic problem for rectangular rubber seals’J. Mech. Eng. Sci.22 (1980): 9–16
PratiE.StrozziA.‘A study of the elastohydrodynamic problem in rectangular elastomeric seals’J. Tribol.24 (1984): 505–512
7.
MüllerH. K.NauB. S.Fluid sealing technology (New York: Marcel Dekker1998)
8.
HiranoF.KanetaM.‘Theoretical investigation of friction and sealing characteristics of flexible seals for reciprocating motion’In Proceedings of the 5th BHRA International Conference on Fluid sealing, Coventry, UK, 1971, paper G2, pp. 17–32.
9.
KantersA. F. C.VerestJ. F. M.VisscherM.‘On reciprocating elastomeric seals: Calculation of film thicknesses using the inverse hydrodynamic lubrication theory’Tribol. Trans.33 (1990): 301–306
10.
FieldG. J.NauB. S.‘Film thickness and friction measurements during reciprocation of a rectangular section rubber seal ring’In Proceedings of the 6th BHRA International Conference on Fluid sealing, Munich, Germany, 1973, paper C5, pp. 45–56.
11.
KawaharaY.OhtakeY.HirabayashiH.‘Oil film formation of oil seals for reciprocating motion’In Proceedings of the 9th BHRA International Conference on Fluid sealing, Noordwijkerhout, The Netherlands, 1981, paper C2, pp. 73–85.
12.
KanetaM.TodorokiH.NishikawaH.KanzakiY.KawaharaY.‘Tribology of flexible seals for reciprocating motion’J. Tribol.122 (2000): 787–795
13.
KantersA. F. C.VisscherM.‘Lubrication of reciprocating seals: Experiments on the influence of surface roughness on friction and leakage’In Proceedings of the 15th Leeds—Lyon Symposium on Tribology, Leeds, UK, 1988, pp. 69–77.
14.
StupkiewiczS.MarciniszynA.‘Elastohydrodynamic lubrication and finite configuration changes in reciprocating elastomeric seals’Tribol. Int.42 (2009): 615–627
15.
NikasG. K.‘Elastohydrodynamics and mechanics of rectangular elastomeric seals for reciprocating piston rods’J. Tribol.125 (2003): 60–69
16.
NikasG. K.‘Transient elastohydrodynamic lubrication of rectangular elastomeric seals for linear hydraulic actuators’Proc. IMechE, Part J: J. Engineering Tribology217 (2003): 461-473 DOI: 10.1243/135065003322620282.
17.
NikasG. K.SaylesR. S.‘Nonlinear elasticity of rectangular elastomeric seals and its effect on elastohydrodynamic numerical analysis’Tribol. Int.37 (2004): 651–660
18.
ÖngünY.AndréM.BartelD.DetersI.‘An axisymmetric hydrodynamic interface element for finite-element computations of mixed lubrication in rubber seals’Proc. IMechE, Part J: J. Engineering Tribology222 (2008): 471-481 DOI: 10.1243/13506501JET393.
19.
NikasG. K.HasegawaT.‘Research on the tribology of hydraulic reciprocating seals’Tribology research trends (Hauppauge, New York: Nova Science Publishers2008): 11–51
20.
SalantR. F.MaserN.YangB.‘Numerical model of a reciprocating hydraulic rod seal’J. Tribol.129 (2007): 91–97
21.
YangB.SalantR. F.‘Numerical model of a reciprocating rod seal with a secondary lip’Tribol. Trans.51 (2008): 119–127
22.
YangB.SalantR. F.‘Numerical model of a tandem reciprocating hydraulic rod seal’J. Tribol.130 (2008): 032201-1-032201-7.
23.
YangB.SalantR. F.‘Soft EHL simulations of U-cup and step hydraulic rod seals’J. Tribol.131 (2009): 021501-1-021501-10.
24.
ThatteA.SalantR. F.‘Transient EHL analysis of an elastomeric hydraulic seal’Tribol. Int.42 (2009): 1424–1432
25.
ThatteA.SalantR. F.‘Elastohydrodynamic analysis of an elastomeric hydraulic seal during fully transient operation’J. Tribol.131 (2009): 031501-1-031501-11.
