Sage Journals: Discover world-class research

Abstract

Numerical model of a bolt-ball joint system is established using software ANSYS and verified through experiments. Based on the bendingrotation curves of the bolt-ball joints obtained through numerical simulation, a finite element model of single-layer reticulated domes with bolt-ball joint system is established using nonlinear beam element with end spring elements in software ANSYS. The analyses of the domes are carried out with different parameters including bending stiffness, ratio of rise to span, rotation-stiffness, ball size, asymmetric load distribution, tube section, support condition and initial imperfection. Several key parameters having influence on the load carrying capacity of a semi-rigidly jointed single-layer reticulated dome are thus identified. Finally, formulas are established for direct estimation of critical loads of semi-rigidly jointed single-layer reticulated domes under symmetric and asymmetric loading conditions.

Keywords

Bolt-Ball Joint System Numerical Simulation Single Layer Reticulated Dome Critical Load Asymmetric Load

Get full access to this article

View all access options for this article.

References

IASS Working Group 8. Analysis, Design and Realization of Space Frames: A State-of-the-Art Report. Bulletin of the International Association for Shells and Spatial Structures, 1984, 85, 25(1–2).

Makowski

. In: Nooshin

, editor. Space Structures of Today and Tomorrow, Third International Conference on Space Structures, London: Elsevier Applied Science Publishers Ltd, 1984, pp. 1–8.

Fathelbab

F.A.

The Effect of Joints on the Stability of Shallow Single Layer Lattice Domes, Ph.D. Thesis, University of Cambridge, 1987.

El-Sheikh

FAI

, Numerical Analysis of Space Trusses with Flexible Member-end Joints, International Journal of Space Structures, 8(3), 1993, pp. 189–197.

Aitziber López Iňigo Puente Miguel

Serna , Numerical Model and Experimental Tests on Single-layer Latticed Domes with Semi-rigid Joints. Computers and Structures, 2007, 85, pp. 360–374.

H.H.

Fan

Shen

S.Z.

Numerical Parametric Investigation of Single-layer Latticed Domes with Semirigid Joints, Journal of the International Association for Shell and Spatial Structures. 2008. Vol. 49. No 2. 99–110.

Shibata

Kato

Yamada

Experimental study on the ultimate strength of single-layer reticular domes, Proceedings of the Fourth International Conference of Space Structures, University of Surry, UK, 1993, 387–395.

Lee

S. L.

See

Swaddiwudhipong

, Evelopment and Testing of a Universal Space Frame Connector, International Journal of Space Structures 1990; Vol. 5 No.2: 130–138.

Koh

S. Swaddiwudhipong. C.G.

Lee

S. L.

., Evelopment and Experimental Investigation of a Space Frame Connector, International Journal of Space Structures 1994; Vol. 9 No.2: 99–106.

10.

Bayo

A. Loureiro. R. Goni. E.

, A One-step Method for Buckling Analysis of Single Layer Latticed Structures with Semi-rigid Connections, Proceedings of the Fifth International Conference of Space Structures, Thomas Telford. London, 2002, 1481–1490.

11.

Chenaghlou

M. R.

, Semi-Rigidity of Connection in Space Structure. Ph.D. thesis, University of Surrey, 1997.

12.

Murakami , Numerical Analysis of Elastic Buckling of Single-Layer Latticed Domes Under Gravity Load, Proceedings of International Congress of IASS-CSCE, Canada, 1992, pp. 576–586.

13.

Kato

Murata

, Dynamic Eelasto-plastic Buckling Simulation System for Single Layer Latticed Domes with Semi-rigid Connections Under Multiple Loadings. International Journal of Space Structures, 12(3–4), 1997, pp. 161–172.

14.

Kato

Mutoh

Shomura

, Collapse of Semi-rigidly Jointed Latticed Domes with Initial Geometric Imperfections, Journal of Constructional Steel Research, 48, 1998, pp. 145–168.

15.

Shen

S. Z.

, Design Formulas for Stability Analysis of Reticulated Shells, Advances in Steel Structures (ICASS ′99), 1999, Pages 51–62.

Direct Estimation of Critical Load for Single-Layer Reticulated Domes with Semi-Rigid Joints

Abstract

Keywords

Get full access to this article

References