An equivalent seismic performance optimization (ESPO) method is proposed in this article based on nonlinear seismic damage analysis, where the constraints and the fitness function of the optimization problem are expressed as the seismic performance index combined with the importance coefficient and the damage index. Two prototype buildings, a 9-story building with steel frame and a 15-story building with steel frame plus steel plate shear wall are optimized using the ESPO method, and the building seismic performance is obtained through incremental dynamic analysis. The analysis results show that the global seismic performance of the optimized building has obviously improved while the building self-weight has been reduced significantly.
BeckJ.L.ChanE.IrfanogluA. and PapadimitriouC. (1999). “Multi-criteria optimal structural design under uncertainty”, Earthquake Engineering and Structural Dynamics, Vol. 28, No. 7, pp. 741–761.
2.
BermanJ.W. (2011). “Seismic behavior of code designed steel plate shear walls”, Engineering Structures, Vol. 33, No. 1, pp. 230–244.
3.
BonoraN. (1997). “A nonlinear CDM model for ductile failure”, Engineering Fracture Mechanics, Vol. 58, No. 1–2, pp. 11–28.
4.
ChanC.M. and ZouX.K. (2004). “Elastic and inelastic drift performance optimization for reinforced concrete buildings under earthquake loads”, Earthquake Engineering and Structural Dynamics, Vol. 33, No. 8, pp. 929–950.
5.
EstevaL.Diaz-LopezO.Garcia-PerezJ.SierraG. and IsmaelE. (2002). “Life-cycle optimization in the establishment of performance-acceptance parameters for seismic design”, Structural Safety, Vol. 24, No. 2–4, pp. 187–204.
6.
FEMA 350 (2000). Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings, Federal Emergency Management Agency, Washington, DC, USA.
7.
FEMA 356 (2000). Prestandard and Commentary for the Seismic Rehabilitation of Buildings, Federal Emergency Management Agency, Washington, DC, USA.
8.
FragiadakisM. and PapadrakakisM. (2008). “Performance-based optimum seismic design of reinforced concrete structures”, Earthquake Engineering and Structural Dynamics, Vol. 37, No. 6, pp. 825–844.
9.
GanzerliS.PantelidesC.P. and ReaveleyL.D. (2000). “Performance-based design using structural optimization”, Earthquake Engineering and Structural Dynamics, Vol. 29, No. 11, pp. 1677–1690.
10.
KicingerR.ArciszewskiT. and JongK. D.E. (2005). “Evolutionary computation and structural design: A survey of the state-of-the-art”, Computers and Structures, Vol. 83, No. 23–24, pp.1943–1978.
11.
LiuM.BurnsS.A. and WenY.K. (2003). “Optimal seismic design of steel frame buildings based on life cycle cost considerations”, Earthquake Engineering and Structural Dynamics, Vol. 32, No. 25, pp. 1313–1332.
12.
LiuM.BurnsS.A. and WenY.K. (2005). “Multi objective optimization for performance-based seismic design of steel moment frame structures”, Earthquake Engineering and Structural Dynamics, Vol. 34, No. 3, pp. 289–306.
13.
OhtoriY.SpencerB.F.Jr. and DykeS.J. (2004). “Benchmark control problems for seismically excited nonlinear buildings”, Journal of Engineering Mechanics, ASCE, Vol. 130, No. 4, pp. 366–385.
14.
PapadopoulosV. and LagarosN.D.(2009). “Vulnerability-based robust design optimization of imperfect shell structures”, Structural Safety, Vol. 31, No. 6, pp. 475–482.
15.
PezeshkS. (1998). “Design of framed structures: An integrated nonlinear analysis and optimal minimum weight design”, International Journal for Numerical Methods in Engineering, Vol. 41, No. 3, pp. 459–471
16.
PirondiA. and BonoraN. (2003). “Modeling ductile damage under fully reversed cycling”, Computational Material Science, Vol. 26, pp. 129–141.
17.
SalawuO.S. (1997). “Detection of structural damage through changes in frequency: A review”, Engineering Structures, Vol. 19, No. 9, pp. 718–723.
18.
ThorburnL.J.KulakG.L. and MontgomeryC.J. (1983). Analysis of Steel Plate Shear Walls, No. 107, Department of Civil Engineering, University of Alberta, Canada.
19.
VamvatsikosD.V. and CornellC.A. (2002). “Incremental dynamic analysis”, Earthquake Engineering and Structural Dynamics, Vol. 31, No. 3, pp. 491–514.
20.
ZhouY.LuX.L.HuangZ.H. and BoY. (2010). “Seismic behavior of composite shear walls with multi-embedded steel sections. part II: Analysis”, The Structural Design of Tall and Special Buildings, Vol. 19, No. 6, pp. 637–655.
21.
ZouX.K.ChanC.M.LiG. and WangQ. (2007). “Multiobjective optimization for performance-based design of reinforced concrete frames”, Journal of Structural Engineering. ASCE, Vol. 133, No. 10, pp. 1462–1474.
