Abstract
The experimental conditions and procedure for quantitative analysis of steel by laser-induced breakdown spectroscopy in argon at atmospheric pressure using an infrared Nd:YAG laser have been studied. Satisfactory analytical results have been obtained for the determination of C, Si, Cr, and Ni contents in low-alloyed steels. The lens-to-sample distance is shown to be a relevant parameter, which can be selected at each pulse energy to enhance the line intensities and the repeatability of measurements. A higher precision has been obtained for line-intensity ratios (0.9–2.5% relative standard deviation for concentrations higher than 0.1%) than for absolute intensity measurements. The calibration curves for all the elements have correlation coefficients above 0.999. Detection limits are in the range 6–80 ppm.
Keywords
Get full access to this article
View all access options for this article.
