Sage Journals: Discover world-class research

Abstract

Control of chromium oxidation in the electric arc furnace (EAF) is a significant problem in stainless steel production due to variations of the chemical compositions in the EAF charge. One potential method to control chromium oxidation is to analyze the emission spectrum of the electric arc in order to find indicators of rising chromium content in slag. The purpose of this study was to determine if slag composition can be gained by utilizing electric arc emission spectra in the laboratory environment, despite electric arc voltage fluctuations and varying slag composition. The purpose of inducing voltage fluctuation was to simulate changes in the industrial EAF process. The slag samples were obtained from Outokumpu Stainless Oy Tornio Works, and three different arc currents were used. The correlation analysis showed that the emission spectra offer numerous peak ratios with high correlations to the X-ray fluorescence-measured slag CrO _x /FeO _x and MnO/SiO₂ ratios. These ratios are useful in determining if the reduction agents have been depleted in the EAF. The results suggest that analysis of laboratory-scale electric arc emission spectra is suitable for indicating the high CrO _x or MnO content of the slag despite the arc fluctuations. Reliable analysis of other slag components was not successful.

Keywords

Emission spectroscopy Direct current arc DC arc Correlation Slag Electric arc furnace EAF

Get full access to this article

View all access options for this article.

References

Risonarta

V.Y.

Echterhof

Jung

H.P.

Beiler

Lenz

Kirschen

Pfeifer

. “Application of an Off-Gas Analysing System to Control Oxidation during Stainless Steelmaking in an EAF”. Steel. Res. Int. 2010. 81(9): 778–783.

Gruber

Heitz

Arnold

Däuerle

Ramaseder

Meyer

Hochörtler

Koch

. “In situ Analysis of Metal Melts in Metallurgic Vacuum Device by Laser-Induced Breakdown Spectroscopy”. Appl. Spectrosc. 2004. 58(4): 457–462.

Sturm

Schmitz

H.-U.

Reuter

Fleige

Noll

. “Fast Vacuum Slag Analysis in a Steel Works by Laser-Induced Breakdown Spectroscopy”. Spectrochim. Acta, Part B. 2008. 63(10): 1167–1170.

Stojadinović

Jovović

Petković

Vasilić

Konjević

. “Spectroscopic and Real-Time Imaging Investigation of Tantalum Plasma Electrolytic Oxidation”. Surf. Coat. Technol. 2011. 205(23–24), 5406–5413.

Konuk

A.R.

Aarts

R.G.K.M.

Huis in 't Veldt

A. J.

Sibillano

Rizzi

Ancona

. “Process Control of Stainless Steel Laser Welding Using an Optical Spectroscopy Sensor”. Phys. Procedia. 2011. 12(Part A): 744–751.

Wendt

Persson

. “Optical Spectroscopy for the Characterization of an Alloy Steel Converting Process”. Appl. Spectrosc. 1990. 44(6): 987–991.

Chiba

Ono

Saeki

Yamauchi

Kanamoto

Ohno

. “Development of Direct Analysis Method for Molten Iron in Converter: Hotspot Radiation Spectrometry”. Ironmak. Steelmak. 1993. 20(3): 215–220.

Veilette

Simard

. “Electric Arc Characterization Using High Speed Cinematography and Spectroscopy”. 42nd Electr. Furn. Conf. Proc. Toronto; December 4–7, 1984.

Mäkinen

Niskanen

Tikkala

Aksela

. “Optical Emission from a Small Scale Model Electric Arc Furnace in 250–600 nm Region”. Rev. Sci. Instrum. 2013. 84(4): 043111.

10.

Pretorius

E.B.

Nunnington

R.C.

. “Stainless Steel Slag Fundamentals: From Furnace to Tundish”. Ironmak. Steelmak. 2002. 29(2): 133–139.

11.

Kho

T.S.

Swinbourne

D.R.

Blanpain

Arnout

Langberg

. “Understanding Stainless Steelmaking through Computational Thermodynamics Part 1: Electric Arc Furnace Melting”. Miner. Process. Extr. Metall. Rev. 2010. 119(1): 1–8.

12.

Dunlap

J.C.

Blouke

M.M.

Bodegom

Widenhorn

. “Modeling Nonlinear Dark Current Behavior in CCDs”. IEEE Trans. Electron Devices. 2012. 59(4): 1144–1122.

13.

Dereniak

E.L.

Crowe

D.G.

. Optical Radiation Detectors. New York: John Wiley and Sons, 1984.

14.

Kale

Voigtman

. “Signal Processing of Transient Atomic Absorption Signals”. Spectrochim. Acta. Part B. 1995. 50(12): 1531–1541.

15.

Miller

. “Basic Concepts in Atomic Emission Spectroscopy”. In: Montaser

Golightly

D.W.

, editors. Inductively Coupled Plasma in Analytic Atomic Spectrometry. VHC Publishers Inc., 1987. Pp 17–68.

16.

Benjamini

Hochberg

. “Controlling the False Discovery Rate: A Practical and Powerful Approach to Multiple Testing”. J. R. Statist. Soc. B. 1995. 57(1): 289–300.

17.

Goulden

C.H.

. Methods of Statistical Analysis. New York: John Wiley and Sons Inc., 1952. 2nd ed. Pp. 130.

18.

Ralchenko

Kramida

Reader

NIST ASD Team . “NIST Atomic Spectra Database (version 5.0)”. 2012. http://physics.nist.gov/asd. Gaithersburg, MD: National Institute of Standards and Technology [accessed Jan 15 2013].

Analysis of Arc Emission Spectra of Stainless Steel Electric Arc Furnace Slag Affected by Fluctuating Arc Voltage

Abstract

Keywords

Get full access to this article

References