To obtain the static shape of the continuous steel plate and vibration characteristic, we performed the analysis of the multi-body dynamics in which the continuous steel plate was discretized in many solid bodies. The shape of the steel plate obtained by the measurement experiment was agreement with the static shape of the steel plate obtained by the analysis. Then, dynamical analysis was performed when white noise input to the steel plate. It was confirmed that the vibration could be suppressed when the electromagnets were installed in consideration of the static shape of the steel plate.
InoueA.FujiokaH.MoriiS. and KomoriM., Study on stability of steel strip under the electromagnetic shape controller, The Japan Society of Mechanical Engineers74 (2008), 52–59, doi:10.1299/KIKAIC.74.2878.
2.
InoueA.KawanishiM.MoriiS. and KomoriM., Study on shape control and vibration absorber of steel strip (1st report, result of experimental test), Jounal of the Japan Society of Applied Electromagnetics and Mechanics17 (2009), 79–84.
3.
KabeyaK.IshidaK.SuzukiH.IshigakiY.IshinoK. and IshiiT., Strip vibration and control using electromagnets at gas wipers in CGL, Tetsu-to-Hagane99 (2013), 18–24, doi:10.2355/tetsutohagane.99.610.
4.
SudwilaiP. and OkaK., The frequency response of vibration control with a linear actuator and a permanent magnet, Jounal of the Japan Society of Applied Electromagnetics and Mechanics20 (2012), 216–221, doi:10.1299/jsdd.5.1238.
5.
JungW.JangY.J.LimS. and WonS., Active vibration and flatness control of a strip in a continuous galvanizing line using positive position feedback control, The Iron and Steel Institute of Japan International53 (2013), 854–865, doi:10.2355/isijinternational.53.854.
6.
OguraK.KashiwabaraK.MitsuhashiY.OshinoyaY. and IshibashiK., Fundamental consideration of optimal relationship between magnetic force and location of permanent magnet installed in edge direction of thin steel plate, Proceeding of the School of Engineering, Tokai University, Series E44 (2004), 43–48.
7.
NaritaT.OshinoyaY.HasegawaS. and KasuyaH., Fundamental research on optimal position of permanent magnets in magnetic levitation control system for thin steel plate, Proceeding of the School of Engineering, Tokai University, Series E35 (2010), 41–46.
8.
KawasakiK.NaritaT.KatoH. and MoriyamaH., Non-contact guide for traveling elastic steel plate using electromagnets: Fundamental consideration of electromagnet placement using FEM, Transaction of the Magnetics Society of Japan Special Issues1 (2017), 82–87.
9.
BesshoT.IshiharaS.NarawaY.YamaguchiR.NaritaT. and KatoH., Noncontact guide system for traveling continuous steel plates using electromagnet and supplement of permanent magnets for suppressing vibration, Actuators7 (2018), 47.
