Motivated by the requirements of mobile manipulation, a compliant underactuated hand, capable of locking individual joints, has been developed. Locking is accomplished with electrostatic brakes in the joints and significantly increases the maximum pullout forces for power grasps. In addition, by locking and unlocking joints, the hand can adopt configurations and grasp sequences that would otherwise require a fully actuated solution. Other features of the hand include an integrated sensing suite that uses a common transduction technology on flexible printed circuits for tactile and proprioceptive sensing. The hand is analyzed using a three-dimensional rigid body analysis package with efficient simulation of compliant mechanisms and contacts with friction. This package allows one to evaluate design tradeoffs among link lengths, required tendon tensions, spring stiffnesses and braking requirements to grasp and hold a wide range of objects. Results of grasping and pullout tests confirm the utility of the simulations.
AnitescuMPotraF (1997) Formulating dynamic multi-rigid-body contact problems with friction as solvable linear complementarity problems. Nonlinear Dynamics14(3): 231–247.
2.
AraiHTachiS (1991) Position control of manipulator with passive joints using dynamic coupling. IEEE Transactions on Robotics and Automation7(4): 528–534.
3.
AukesDMHeynemanBDuchaineVCutkoskyMR (2011) Varying spring preloads to select grasp strategies in an adaptive hand. In: 2011 IEEE/RSJ International conference on intelligent robots and systems, San Francisco, CA, USA, 25–30 September 2011, pp. 1373–1379. Piscataway: IEEE Press.
4.
AukesDMKimSGarciaPEdsingerACutkoskyMR (2012) Selectively compliant underactuated hand for mobile manipulation. In: 2012 IEEE International conference on robotics and automation, St Paul, MN, USA, 14–18 May 2012, pp. 2824–2829. Piscataway: IEEE Press.
5.
BalasubramanianRDollarAM (2011) Performance of serial underactuated mechanisms: Number of degrees of freedom and actuators. In: 2011 IEEE/RSJ International conference on intelligent robots and systems, San Francisco, CA, USA, 25–30 September 2011, pp. 1823–1829. Piscataway: IEEE Press.
6.
BegocVKrutSDombreEDurandCPierrotF (2007) Mechanical design of a new pneumatically driven underactuated hand. In: 2007 IEEE International conference on robotics and automation, Roma, Italy, 10–14 April 2007, pp. 927–933. Piscataway: IEEE Press.
7.
BicchiA (2000) Hands for dexterous manipulation and robust grasping: a difficult road toward simplicity. IEEE Transactions on Robotics and Automation16(6): 652–662.
8.
BicchiAGabicciniMSantelloM (2011) Modelling natural and artificial hands with synergies. Philosophical Transactions of the Royal Society, B: Biological Sciences366(1581): 3153–3161.
9.
BicchiAKumarV (2000) Robotic grasping and contact: a review. In: 2000 International conference on robotics and automation, San Francisco, CA, USA, 24–28 April 2000, vol. 1, pp. 348–353. Piscataway: IEEE Press.
10.
BirglenL (2009) Type synthesis of linkage-driven self-adaptive fingers. Journal of Mechanisms and Robotics1(2): 021010.
11.
BirglenL (2011) The kinematic preshaping of triggered self-adaptive linkage-driven robotic fingers. Mechanical Sciences2(1): 41–49.
CannataGMaggialiMMettaGSandiniG (2008) An embedded artificial skin for humanoid robots. In: 2008 IEEE International conference on multisensor fusion and integration for intelligent systems, Seoul, South Korea, 20–22 August 2008, pp. 434–438. Piscataway: IEEE Press.
14.
CatalanoMGiorgioGSerioAEFPiazzaCBicchiA (2012) Adaptive synergies for a humanoid robot hand. In: IEEE-RAS international conference on humanoid robots, Osaka, Japan, 29 November–1 December 2012, Piscataway: IEEE Press.
15.
CiocarlieMAllenP (2009a) A design and analysis tool for underactuated compliant hands. In: 2009 IEEE/RSJ International conference on intelligent robots and systems, St Louis, MO, USA, 10–15 October 2009, pp. 5234–5239. Piscataway: IEEE Press.
16.
CiocarlieMAllenP (2009b) Hand posture subspaces for dexterous robotic grasping. International Journal of Robotics Research28(7): 851–867.
17.
CiocarlieMAllenP (2011) A constrained optimization framework for compliant underactuated grasping. Mechanical Sciences2(1): 17–26.
18.
CutkoskyMR (1989) On grasp choice, grasp models, and the design of hands for manufacturing tasks. IEEE Transactions on Robotics and Automation5(3): 269–279.
19.
CutkoskyMRHoweRDProvancherWR (2008) Force and tactile sensors. In: SicilianoBKhatibO (eds) Springer Handbook of Robotics. Berlin: Springer, ch. 20, pp. 455–476.
20.
DemersLAAGosselinC (2009) Kinematic design of an ejection-free underactuated anthropomorphic finger. In: 2009 IEEE International conference on robotics and automation, Kobe, Japan, 12–17 May 2009, pp. 2086–2091. Piscataway: IEEE Press.
21.
DollarAMHoweRD (2006) A robust compliant grasper via shape deposition manufacturing. IEEE/ASME Transactions on Mechatronics11(2): 154–161.
22.
DollarAMHoweRD (2010) The highly adaptive SDM hand: Design and performance evaluation. International Journal of Robotics Research29(5): 585–597.
23.
DollarAMHoweRD (2011) Joint coupling design of underactuated hands for unstructured environments. International Journal of Robotics Research30(9): 1157–1169.
24.
DrumwrightE (2011) Modeling contact friction and joint friction in dynamic robotic simulation using the principle of maximum dissipation. In: HsuDIslerVLatombeJ-CLinM-C (eds) Algorithmic Foundations of Robotics IX. Berlin: Springer, vol. 68.
25.
GabicciniMBicchiAPrattichizzoDMalvezziM (2011) On the role of hand synergies in the optimal choice of grasping forces. Autonomous Robots31(2–3): 235–252.
26.
GosselinCLalibertéT (1998) Underactuated mechanical finger with return actuation. Patent 5762390, USA.
27.
GrebensteinMChalonMFriedlWHaddadinSWimböckTHirzingerG. (2012) The hand of the DLR hand arm system: Designed for interaction. International Journal of Robotics Research31(13): 1531–1555.
28.
GustafssonCPetterssonB (1991) Absolute measurement scale system. Patent 5062214, USA.
29.
HammondFLWeiszJde la Llera KurthAAAllenPKHoweRD (2012) Towards a design optimization method for reducing the mechanical complexity of underactuated robotic hands. In: 2012 IEEE International conference on robotics and automation, St Paul, MN, USA, 14–18 May 2012, pp. 2843–2850. Piscataway: IEEE Press.
30.
HeynemanBCutkoskyMR (2012) Biologically inspired tactile classification of object-hand and object-world interactions. In: 2012 IEEE International conference on robotics and biomimetics, Guangzhou, China, 11–14 December 2012, pp. 167–173. Piscataway: IEEE Press.
31.
HiroseSUmetaniY (1978) The development of soft gripper for the versatile robot hand. Mechanism and Machine Theory13(3): 351–359.
32.
JohnsenARahbekK (1923) A physical phenomenon and its applications to telegraphy, telephony, etc. Journal of the Institution of Engineers61(320): 713–725.
33.
KaneswaranKArshakK (2008) Applying consumer technologies to assistive device design. In: 14th Nordic–Baltic conference on biomedical engineering and medical physics (ed KatashevADekhtyarYSpigulisJ), Riga, Latvia, 16–20 June 2008, vol. 20, pp. 131–134. Berlin: Springer.
34.
KragtenGAHerderJL (2010) The ability of underactuated hands to grasp and hold objects. Mechanism and Machine Theory45(3): 408–425.
35.
LalibertéT (2003) Actuation system for highly underactuated gripping mechanism. Patent 6505870, USA.
36.
LalibertéTBarilMGuayFGosselinC (2010) Towards the design of a prosthetic underactuated hand. Mechanical Sciences1(1): 19–26.
37.
MelchiorriCKanekoM (2008) Robot hands. In: SicilianoBKhatibO (eds) Springer Handbook of Robotics. Berlin: Springer, pp. 345–360.
MontambaultSGosselinCM (2001) Analysis of underactuated mechanical grippers. Journal of Mechanical Design123(3): 367–374.
41.
OkadaT (1979) Object-handling system for manual industry. IEEE Transactions on Systems, Man, and Cybernetics9(2): 79–89.
42.
SpanjerSAJBalasubramanianRDollarAM (2012) Underactuated gripper that is able to convert from precision to power grasp by a variable transmission radio. In: DaiJSZoppiMKongX (eds) Advances in Reconfigurable Mechanisms and Robots I. London: Springer, pp. 669–679.
43.
StewartDTrinkleJ (2000) An implicit time-stepping scheme for rigid body dynamics with Coulomb friction. In: 2000 IEEE International conference on robotics and automation, San Francisco, CA, USA24–28 April 2000, pp. 162–169. Piscataway: IEEE Press.
44.
TakakiTOmataT (2006) 100g–100N Finger joint with load-sensitive continuously variable transmission. In: 2006 IEEE International conference on robotics and automation, Orlando, FL, USA, 15–19 May 2006, pp. 976–981. Piscataway: IEEE Press.
45.
UlmenJCutkoskyM (2010) A robust, low-cost and low-noise artificial skin for human-friendly robots. In: 2010 IEEE International conference on robotics and automation, Anchorage, AK, USA, 3–7 May 2010, pp. 4836–4841. Piscataway: IEEE Press.
46.
UlrichNPaulRBajcsyR (1988) A medium-complexity compliant end effector. In: 1998 IEEE International conference on robotics and automation, Philadelphia, PA, USA, 24–29 April 1988, pp. 434–436. Piscataway: IEEE Press.
47.
VenkataramanSIberallT (1990) Dexterous Robotic Hands. New York: Springer-Verlag.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
